Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Round Bars, where our packaging specialists pack these products in best quality material to make sure of their safe transportation. The light weight, corrosion resistance and high strength of our Titanium Grade 5 Square Bars allow this grade to be used in a lot of applications. Most usually used alloy, these Titanium Grade 5 Flat Bars is suggestively sturdier than other commercially pure titanium whereas still holding the same toughness and thermal features (without thermal conductivity).

Titanium Gr 5 Round Bars Manufacturer In India | Titanium Gr 5 Round Bars Manufacturer In Mumbai | Titanium Gr 5 Round Bars Exporter In India | Titanium Gr 5 Round Bars Exporter In Mumbai | Titanium Gr 5 Round Bars Supplier In India | Titanium Gr 5 Round Bars Supplier In Mumbai | Titanium Gr 5 Round Bars Stockist In India | Titanium Gr 5 Round Bars Stockist In Mumbai
Titanium Gr 5 Round Bars

     Titanium Gr 5 Round Bars

These Titanium Grade 5 Threaded Bars is the most broadly used titanium alloy of the alpha – plus – beta session, and is as well the most communal of all titanium alloys. Meanwhile, our Titanium Grade 5 Hollow Bars are also being offered in different sizes and shapes to our customers. Although “commercially pure” titanium has acceptable mechanical properties and has been used for orthopedic and dental implants, for most applications of these Titanium Grade 5 Hexagonal Bars is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight.

Mechanical properties for fracture critical applications of our Titanium Grade 5 Triangular Bars can be enhanced through processing and heat treatment. These Titanium Grade 5 Bars is resistant to general corrosion but may be quickly attacked by environments that cause breakdown of the protective oxide layer including hydrofluoric (HF), hydrochloric (HCl), sulfuric and phosphoric acids.

Titanium Alloy Gr 5 Round Bar Specifications

Specifications : ASTM B348/ ASTM SB348
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size
: 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Above
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Grade 5 Titanium Round Bar Chemical Composition

Grade Ti C Fe Al V O
Titanium Grade 5  90 min  – 0.25 max  6 min 4 min  0.02 max

Titanium Alloy Grade 5 Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880  14 %

Equivalent Grades for Grade 5 Titanium Round Bar

STANDARD WERKSTOFF NR. UNS
Titanium Grade 5 3.7165 R56400

Titanium Grade 5 Round Bar Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Grade 5 Titanium Rods Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Titanium Gr 5 Round Bars
Titanium Gr 5 Round Bars

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Round Bars, where our packaging specialists pack these products in best quality material to make sure of their safe transportation. The light weight, corrosion resistance and high strength of our Titanium Grade 5 Square Bars allow this grade to be used in a lot of applications.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5