Nickel Alloy 201 Tube to Union Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Tube to Union Fittings similar to parker and Swagelok, which is ferromagnetic. Our Nickel 201 Tube Fittings are solid solution strengthened, commercially pure wrought materials by means of good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. These Nickel 201 Compression Fittings provides high thermal and electrical conductivity in comparison to nickel – base alloys, stainless and low alloy steels.

Nickel Alloy 201 Tube to Union Fittings Manufacturer In India | Nickel Alloy 201 Tube to Union Fittings Manufacturer In Mumbai | Nickel Alloy 201 Tube to Union Fittings Exporter In India | Nickel Alloy 201 Tube to Union Fittings Exporter In Mumbai | Nickel Alloy 201 Tube to Union Fittings Supplier In India | Nickel Alloy 201 Tube to Union Fittings Supplier In Mumbai | Nickel Alloy 201 Tube to Union Fittings Stockist In India | Nickel Alloy 201 Tube to Union Fittings Stockist In Mumbai 
Nickel Alloy 201 Tube to Union Fittings
Nickel Alloy 201 Tube to Union                    Fittings

Our Nickel 201 Union Fittings is not recommended for service above 600 Degree F (316 Degree C) because long – time exposures in the 800 Degree F to 1200 Degree F range result in precipitation of a carbon containing phase and loss of ductility. These Nickel 201 Ferrule Fittings is a modification of Nickel 200 to control carbon which keeps it from being embrittled by inter – granular precipitates at temperatures of 600 Degree F to 1400 Degree F in many processes.

Our Nickel 201 Double Ferrule Fittings also has a high Curie temperature and good magneto strictive properties. These annealed Alloy 201 Tube Fittings has a low hardness and good ductility and malleability. These attributes, combined with good weldability, make our Alloy 201 Compression Fittings highly fabricable. These Alloy 201 Union Tube Fittings has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.

Nickel Alloy 201 Tube to Union Specifications

Standards : ASTM B366 / ASME SB366
Size Range : 1/16″OD to 2″OD, 2mm OD to 50mm OD
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
End : Threaded, Welding, JIC
Pressure Rating : 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting

High Nickel Alloy 201 Tube To Union Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel Alloy 201 Tube To Union Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Alloy Ferrule Fitting Tube To Union

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 LC-Ni 99

High Nickel Alloy 201 Tube To Union Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel Alloy 201 Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Nickel Alloy 201 Tube to Union Fittings
Nickel Alloy 201 Tube to Union Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Tube to Union Fittings similar to parker and Swagelok, which is ferromagnetic. Our Nickel 201 Tube Fittings are solid solution strengthened, commercially pure wrought materials by means of good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. These Nickel 201 Compression Fittings provides high thermal and electrical conductivity in comparison to nickel – base alloys, stainless and low alloy steels.

Product Brand: Sachiya Steel International

Product Currency: INR

Product Price: 80

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply