Stainless Steel 304H Tube to Union Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304H Tube to Union Fittings similar to parker and Swagelok, which is a metal from the nickel chromium family. These Stainless Steel 304H Tube Fittings is considered a super alloy and special metal with specific applications, where it has several characteristics that make is a desirable metal. Stainless Steel 304H Compression Fittings is also resistant to oxidation and can withstand high temperatures, which is further resistant to pressure which makes it perfect for extreme applications.

Stainless Steel 304H Tube to Union Fittings Manufacturer In India | Stainless Steel 304H Tube to Union Fittings Manufacturer In Mumbai | Stainless Steel 304H Tube to Union Fittings Exporter In India | Stainless Steel 304H Tube to Union Fittings Exporter In Mumbai | Stainless Steel 304H Tube to Union Fittings Supplier In India | Stainless Steel 304H Tube to Union Fittings Supplier In Mumbai | Stainless Steel 304H Tube to Union Fittings Stockist In India | Stainless Steel 304H Tube to Union Fittings Stockist In Mumbai
Stainless Steel 304H Tube to Union Fittings
  Stainless Steel 304H Tube to                    Union Fittings

When it is exposed to heat, these Stainless Steel 304H Union Tube Fittings forms a layer to protect the surface from heat and other damage. Due to all of these characteristics, Stainless Steel 304H Compression Tube Fittings can be used for a wide variety of applications, including sea-water applications. To demonstrate this reaction, these Stainless Steel 304H Ferrule Fittings of annealed were exposed to 1200 Degree F, 1400 Degree F, and 1600 Degree F for 2000 hours contracted about 0.048 %.

Measurements were made to determine dimensional stability of Stainless Steel 304H Double Ferrule Fittings, where 1800 Degree F is a temperature at which scaling resistance becomes a significant factor in service. Extensive investigation of the stability of these SS 304H Union Fittings following exposure for extended periods in the 1000 Degree F to 1800 Degree F temperature range has shown complete absence of embrittling intermetallic phases such as sigma.

Stainless Steel 304H Tube to Union Specifications

Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

SS 304H Tube To Union Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304H 0.10 max 2.0 max 0.75 max 0.045 max 0.03 max 18 – 20 8 – 10.5

Stainless Steel 304H Tube To Union Mechanical Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
304H 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 304H Stainless Steel Ferrule Fitting Tube To Union

Grade UNS WERKSTOFF NR
304H S30409 1.4301

SS 304H Tube To Union Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 304H Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 304H Tube to Union Fittings
Stainless Steel 304H Tube to Union Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304H Tube to Union Fittings similar to parker and Swagelok, which is a metal from the nickel chromium family. These Stainless Steel 304H Tube Fittings is considered a super alloy and special metal with specific applications, where it has several characteristics that make is a desirable metal. Stainless Steel 304H Compression Fittings is also resistant to oxidation and can withstand high temperatures, which is further resistant to pressure which makes it perfect for extreme applications.

Product Brand: Sachiya Steel International

Product Currency: INR

Product Price: 80

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply