Nickel Alloy 200 Sheets Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Nickel Alloy 200 Sheets, Plates and Coils to the respected patrons. Nickel 200 Sheets (UNS N02200) has a low annealed rigidity and extremely low work – toughening rate. Nickel 200 Plates is used in food handling machinery, general corrosion – resistant structures and parts, caustic solutions, etc. Nickel 200 Coils is chosen with beyond 315 Degree C, for the reason that of its enhanced resistance to “creep.” Nickel 200 Slating Coils is ferromagnetic and has comparatively low electrical resistivity, which consists of low carbon version of the alloy. By means of Nickel 200 Perforated Coils, the limitations of both alloys are merged into a solitary dual chemistry that outcomes in a distinct alloy by means of the finest features of both.

Nickel Alloy 200 Sheets
Nickel Alloy 200 Sheets

Meanwhile, these Alloy 200 Sheets are also being offered in different sizes and shapes to our customers. Alloy 200 Plates is combined with higher creep properties at temperature and unsullied to form incredibly powerful and ductile. The unsullied of Alloy 200 Coils has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing Sulphur gases don’t seem to be gift.

Nickel Alloy 200 Sheets Manufacturer In India| Nickel Alloy 200 Sheets Manufacturer In Mumbai | Nickel Alloy 200 Sheets Exporter In India | Nickel Alloy 200 Sheets Exporter In Mumbai | Nickel Alloy 200 Sheets | Nickel Alloy 200 Sheets Supplier In India |Nickel Alloy 200 Sheets Supplier In Mumbai| Nickel Alloy 200 Sheets Stockist In India

The high metal and nickel contents of Alloy 200 Slating Coils offer comparable corrosion resistance, superior resistance to oxidization. Therefore the retention of Alloy 200 Perforated Coils has a bigger fraction of temperature strength than the common solid solution alloys like 304.

Nickel 200 Sheet, Plate & Coil Specifications

Specifications : ASTM / ASME SB 168
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Nickel 200 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 200 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Nickel 200 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 200 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 200 Sheets
Nickel Alloy 200 Sheets 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Nickel Alloy 200 Sheets, Plates and Coils to the respected patrons. Nickel 200 Sheets (UNS N02200) has a low annealed rigidity and extremely low work – toughening rate.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply