Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 825 Sheet, Plates and Coils, which are made by using best quality of material. Heavy duty machining machinery and tooling must be used in these Incoloy 825 Slating Coils to minimalize chatter or work – toughening of the alloy ahead of the cutting. The levels of copper and molybdenum enable our Incoloy 825 Perforated Coils to resist reducing acids and agents. Chemical configuration of these Alloy 825 Plates offer great resistance to several corrosive atmospheres, such as crevice corrosion, pitting, stress – corrosion cracking and inter – granular corrosion. Alloy 825 Coils is used in good temperatures for about 1020 Degree F.

Incoloy 825 Sheet

Incoloy 825 Sheet

Meanwhile, Alloy 825 Slating Coils are also being offered in different sizes and shapes to our customers. These Alloy 825 Perforated Coils has good mechanical properties from moderate to high temperatures, where conventional machining techniques used for iron based alloys may be used. Incoloy UNS N08825 Sheets is especially resistant to sulfuric and phosphoric acids, which further has good mechanical performance in both room temperature and up to 550 Degree C.

These Incoloy 825 Sheets is stabilized annealed at the mill to resist inter – granular corrosion as – welded, where tooling should be such as to allow for liberal clearances and radii. The outstanding property of Nickel-Alloy 825 Coils is its corrosion resistance. We also offer these Nickel-Alloy 825 Plates in best possible prices.

Incoloy 825 Sheet, Plate & Coil Specifications

Specifications : ASTM / ASME SB 424
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Incoloy 825 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

Alloy 825 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 825 Incoloy Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

Incoloy 825 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 825 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Incoloy 825 Sheet
Incoloy 825 Sheet Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 825 Sheet, Plates and Coils, which are made by using best quality of material.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5