Monel Alloy 400 Pipe Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Pipe Fittings, which is a solid – solution binary alloy. Monel 400 Compression Pipe Fittings is an alloy, which is a combination of two or more elements of which at least one is a metal and where the resultant material has metallic properties). Monel 400 Ferrule Pipe Fittings is based on nickel and copper and also contains iron and manganese along with other compounds. Monel 400 Double Ferrule Pipe Fittings is a very expensive alloy, with cost ranging from 5 times to 10 times the cost of copper and nickel; hence its use is limited to those applications where it cannot be replaced with cheaper alternatives.

Monel Alloy 400 Pipe Fittings Manufacturer In India | Monel Alloy 400 Pipe Fittings Manufacturer In Mumbai | Monel Alloy 400 Pipe Fittings Exporter In India | Monel Alloy 400 Pipe Fittings Exporter In Mumbai | Monel Alloy 400 Pipe Fittings Supplier In India | Monel Alloy 400 Pipe Fittings Supplier In Mumbai | Monel Alloy 400 Pipe Fittings Stockist In India | Monel Alloy 400 Pipe Fittings Stockist In Mumbai 
Monel Alloy 400 Pipe Fittings
Monel Alloy 400 Pipe Fittings

Monel 400 Accessories is notable for its toughness, which is maintained over a considerable range of temperatures. Alloy 400 Compression Pipe Fittings is useful at temperatures up to and including 1000 Degree F in oxidizing atmospheres.

Higher temperatures in Alloy 400 Ferrule Pipe Fittings may be employed if the alloy is in a reducing environment. As nickel and copper are mutually soluble in all proportions, Alloy 400 Double Ferrule Pipe Fittings is a single – phase alloy. Alloy 400 Accessories needs to be turned and worked at slow speeds and low feed rates. Alloy 400 Compression Fittings is resistant to corrosion and acids, and some alloys can withstand a fire in pure oxygen.

Monel 400 Pipe Fittings / Accessories Specifications

Specifications : ASTM B366 ASME SB366
Size : 1/16”OD to 2”OD, 2mm OD to 50mm OD
Ends : Threaded, Welding, JIC
Pressure Rating : 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi
Threads : NPT , BSPT, BSPP

Monel 400 Pipe Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Monel 400 0.30 max 2.00 max 0.50 max 0.24max 28.0-34.0 2.50 max 63.00 min

Monel 400 Accessories Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for Monel Alloy 400 Pipe Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Monel 400 Pipe Fittings / Accessories Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel Alloy 400 Pipe Fittings / Accessories Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Monel Alloy 400 Pipe Fittings
Monel Alloy 400 Pipe Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Pipe Fittings, which is a solid – solution binary alloy. Monel 400 Compression Pipe Fittings is an alloy, which is a combination of two or more elements of which at least one is a metal and where the resultant material has metallic properties). Monel 400 Ferrule Pipe Fittings is based on nickel and copper and also contains iron and manganese along with other compounds. Monel 400 Double Ferrule Pipe Fittings is a very expensive alloy, with cost ranging from 5 times to 10 times the cost of copper and nickel; hence its use is limited to those applications where it cannot be replaced with cheaper alternatives.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Monel Alloy 400 Pipe Fittings
Monel Alloy 400 Pipe Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Pipe Fittings, which is a solid – solution binary alloy. Monel 400 Compression Pipe Fittings is an alloy, which is a combination of two or more elements of which at least one is a metal and where the resultant material has metallic properties). Monel 400 Ferrule Pipe Fittings is based on nickel and copper and also contains iron and manganese along with other compounds. Monel 400 Double Ferrule Pipe Fittings is a very expensive alloy, with cost ranging from 5 times to 10 times the cost of copper and nickel; hence its use is limited to those applications where it cannot be replaced with cheaper alternatives.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply