Hastelloy X Pipe Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy X Pipe Fittings, where submerged arc welding is not recommended. Our Hastelloy X Compression Pipe Fittings is the strongest of the formable cobalt alloys, useful for continuous service to 1800 Degree F. Because of long and widespread use, these Hastelloy X Compression Fittings has been the subject of many investigations to determine its properties over a wide range of conditions, thus making it an unusually well characterized material. When exposed for prolonged periods at intermediate temperatures, our Hastelloy X Accessories exhibits a loss of room temperature ductility in much the same fashion as other super alloys.

Hastelloy X Pipe Fittings Manufacturer In India | Hastelloy X Pipe Fittings Manufacturer In Mumbai | Hastelloy X Pipe Fittings Exporter In India | Hastelloy X Pipe Fittings Exporter In Mumbai | Hastelloy X Pipe Fittings Supplier In India | Hastelloy X Pipe Fittings Supplier In Mumbai | Hastelloy X Pipe Fittings Stockist In India | Hastelloy X Pipe Fittings Stockist In Mumbai 
Hastelloy X Pipe Fittings
Hastelloy X Pipe Fittings

These Alloy X Compression Pipe Fittings is welded using gas tungsten arc, gas metal arc, shielded metal arc, electron beam and resistance welding. Our Hastelloy X Ferrule Fittings has good joint fit – up, minimum restraint, low inter – pass temperature and cool rapidly from welding. For maximum ductility fabricated components of these Hastelloy X Double Ferrule Fittings should be annealed 2150 Degree F – 2250 Degree F, and then rapid cool.

Our Alloy X Ferrule Pipe Fittings, while not primarily intended for aqueous corrosion, is also resistant to corrosion by acids such as hydrochloric and nitric acid, as well as being resistant to wet chlorine solutions. These Alloy X Double Ferrule Pipe Fittings has excellent strength and hardness characteristics in the cold – worked condition.

Hastelloy X Pipe Fittings / Accessories Specifications

Specifications : ASTM B574 ASME SB 574
Size : 1/16″ – 2″
Ends : Threaded, Welding, JIC
Pressure Rating : 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi
Threads : NPT , BSPT, BSPP

Hastelloy X Pipe Fittings Chemical Composition

Hastelloy X Ni C Mo Mn Si Fe Cu Ti Co Cr
Balance 0.05-0.15 8.0-10.0 1.0 max 1.0 max 17.0-20.0 0.50 max 0.15 max 0.5-2.5 20.5-23.0

Hastelloy X Accessories Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation

Equivalent Grades for Alloy X Pipe Fittings

STANDARD UNS WERKSTOFF NR.
Hastelloy X N06002 2.4665

Hastelloy Pipe Fittings / Accessories Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy X Pipe Fittings / Accessories Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Hastelloy X Pipe Fittings
Hastelloy X Pipe Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy X Pipe Fittings, where submerged arc welding is not recommended. Our Hastelloy X Compression Pipe Fittings is the strongest of the formable cobalt alloys, useful for continuous service to 1800 Degree F. Because of long and widespread use, these Hastelloy X Compression Fittings has been the subject of many investigations to determine its properties over a wide range of conditions, thus making it an unusually well characterized material. When exposed for prolonged periods at intermediate temperatures, our Hastelloy X Accessories exhibits a loss of room temperature ductility in much the same fashion as other super alloys.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply