Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Coils, Sheets And Plates, where we provide these products in a number of dimensions and sizes for to cater the varied necessities of customers. These Titanium Grade 5 Plates are lengthily used in Medical, Aerospace, Chemical Processing and Marine. Our Titanium Grade 5 Coils is cast able and is used “as cast” in sporting goods. These Titanium Grade 5 Slating Coils provides an outstanding grouping of high toughness and strength. Titanium Grade 5 Perforated Coils has excellent tensile properties at ambient temp and a worthwhile creep resistance for up to 570 Deg F.

Titanium Gr 5 Coils Manufacturer In India | Titanium Gr 5 Coils Manufacturer In Mumbai | Titanium Gr 5 Coils Exporter In India | Titanium Gr 5 Coils Exporter In Mumbai| Titanium Gr 5 Coils Supplier In India| Titanium Gr 5 Coils Supplier In Mumbai| Titanium Gr 5 Coils Stockist In India | Titanium Gr 5 Coils Stockist In Mumbai

Meanwhile, these Grade 5 Titanium Plates are also being offered in different sizes and shapes to our customers. Commercially Pure (CP), Grade 5 Titanium Coils, in its annealed state, is a ductile metal. Resistance to fatigue and crack propagation is excellent of these Grade 5 Titanium Slating Coils. Grade 5 Titanium Perforated Coils are metals that contain a mixture of titanium and other chemical elements, which further are 60 % heavier than aluminum, but twice as strong.

Titanium Gr 5 Coils

Titanium Gr 5 Coils

These Ti Gr. 5 Sheets has a density of 4.51 g/cc – less than 60 % that of steel. Ti Gr. 5 Plates should be emphasized that fabrication operations (annealing, descaling) can increase the impurity level unless particular care is taken. We also offer these Ti Gr. 5 Coils at leading industry prices.

Titanium Gr 5 Sheet, Plate & Coil Specifications

Specifications : ASTM / ASME SB265
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Titanium Gr 5 Plate, Sheet & Coil Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade5 90 min 0.25 max 0.2 max 6 min 4 min

Titanium Gr 5 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Equivalent Grades for Gr 5 Titanium Sheets & Plates

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 5 3.7165 N56400

Titanium Gr 5 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Gr 5 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Titanium Gr 5 Coils
Titanium Gr 5 Coils Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Coils, Sheets And Plates, where we provide these products in a number of dimensions and sizes for to cater the varied necessities of customers. These Titanium Grade 5 Plates are lengthily used in Medical, Aerospace, Chemical Processing and Marine

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5