Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Round Bar, which are generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade. Special consideration of Stainless Steel 410 Square Bars should be given to avoid brittle weld fractures during fabrication by minimizing discontinuities, maintaining low weld heat input and occasionally warming the part somewhat before forming. A major difference can be attributed to the addition of Stainless Steel 410 Flat Bars to control hardening which results in the need for higher heat input to achieve penetration during arc welding.
Stainless Steel 410 Round Bar Manufacturer In India | Stainless Steel 410 Round Bar Manufacturer In Mumbai | Stainless Steel 410 Round Bar Exporter In India | Stainless Steel 410 Round Bar Exporter In Mumbai | Stainless Steel 410 Round Bar Supplier In India | Stainless Steel 410 Round Bar Supplier In Mumbai | Stainless Steel 410 Round Bar Stockist In India| Stainless Steel 410 Round Bar Stockist In Mumbai
When weld filler is required, Stainless Steel 410 Threaded Bars is most often specified immersed in a warm solution of 10 % – 20 % nitric acid followed by a water rinse to remove any residual iron. Stainless Steel 410 Hollow Bars contains a minimum of 12 % chromium, just sufficient enough to give corrosion resistant properties. Stainless Steel 410 Hexagonal Bars has higher carbon content which is designed to optimize strength and hardness characteristics.
Stainless Steel 410 Triangular Bars has good ductility it the annealed condition but is capable of being hardened the highest hardness of the 12 % chromium grades. Due to its hardening properties, Stainless Steel 410 Bars is not often welded, although it is possible. Its best corrosion resistance is achieved when Stainless Steel 410 Rods is hardened and surface ground or polished.
SS 410 Round Bar Specifications |
||
| Specifications | : | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 410 Round Bars |
: | Outside Diameter in the range of 4mm to 500mm |
| SS 410 Bright Bars |
: | Outside Diameter in the range of 4mm to 100mm |
| SS 410 Hex Bars | : | 18mm – 57mm (11/16″ to 2-3/4″) |
| SS 410 Square Bars |
: | 18mm – 47mm (11/16″ to 1-3/4″) |
| SS 410 Flat Bars |
: | 1/2” to 10” in thickness range of 2mm to 150mm, |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | : | 1 to 6 Meters, Custom Cut Lengths |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
410 Stainless Steel Round Bar Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 410 | 0.15 max | 1 max | 1 max | 0.040 max | 0.030 max | 11.5-13.5 | – | 0.75 | – |
Stainless Steel 410 Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| MPa – 480 | MPa – 275 |
Equivalent Grades for 410 Stainless Steel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 410 | 1.4006 | S41000 | SUS 410 | – | – | – | – |
SS 410 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
410 Steel Rods Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 410 Round Bar
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Round Bar, which are generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5