Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 410 Plates, Sheets, Coils, which is essentially non – magnetic when annealed. Stainless Steel 410 Plates is austenitic chromium – nickel – manganese stainless steel which was developed to conserve nickel. Stainless Steel 410 Coils is a lower cost alternative to conventional Cr – Ni stainless steels, where nickel is replaced by additions of manganese and nitrogen. Stainless Steel 410 Slating Coils is non – harden able by thermal treatment, but may be cold worked to high tensile strengths. Stainless Steel 410 Perforated Coils is resistant to a wide variety of mild to moderately corrosive environments.
Stainless Steel 410 Plates Manufacturer In India | Stainless Steel 410 Plates Manufacturer In Mumbai | Stainless Steel 410 Plates Exporter In India| Stainless Steel 410 Plates Exporter In Mumbai | Stainless Steel 410 Plates Supplier In India | Stainless Steel 410 Plates Supplier In Mumbai | Stainless Steel 410 Plates Stockist In India | Stainless Steel 410 Plates Stockist In Mumbai
410 Stainless Steel Sheets has corrosion resistance approaching that of SS 301 and has been successfully substituted for SS 304 in many mild environments and in many applications. 410 Stainless Steel Plates is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked. The annealing temperature for 410 Stainless Steel Coils is between the ranges of 1850 Degree F – 2000 Degree F.
Meanwhile, rapid cooling of SS 410 Sheets through the carbide precipitation range (1500 Degree F – 800 Degree F) is necessary to keep the carbides in solution and prevent sensitization. SS 410 Plates is not harden able by thermal treatment and is only harden able by cold working. SS 410 Coils can be welded by all conventional methods applied to 18 percent chromium, 8 percent nickel steels.
Stainless Steel 410 Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM A240 / ASME SA240 |
| Thickness | : | 4mm-100mm |
| Width |
: | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
SS 410 Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 410 | 0.15 max | 1.0 max | 1.0 max | 0.040 max | 0.030 max | 11.5 – 13.5 | – | 0.50 max | – |
Stainless Steel 410 Sheets, Plates & Coils Mechanical Properties
| Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
| 410 | 65 (450) | 30 (205) | 20 | 217 | 96 |
Equivalent Grades for 410 Stainless Steel Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 410 | 1.4006 | S41000 | SUS 410 | 410S21 | – | – | X12Cr13 |
SS 410 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 410 Sheets, Plate & Coils Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 410 Plates
Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 410 Plates, Sheets, Coils, which is essentially non – magnetic when annealed. Stainless Steel 410 Plates is austenitic chromium – nickel – manganese stainless steel which was developed to conserve nickel.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5