Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Plates, Sheets, Coils, which is quenched and magnetic. Stainless steels are not as corrosion – resistant as the other two classes but are extremely strong and tough, as well as highly machinable, and can be hardened by heat treatment. Martensitic Stainless Steel 317 Plates contains chromium (12 % – 14 %), molybdenum (0.2 % – 1 %), nickel (less than 2 %), and carbon (about 0.1 % – 1 %), giving it more hardness but making the material a bit more brittle. Stainless Steel 317 Coils has a mixed microstructure of austenite and ferrite, the aim usually being to produce a 50 / 50 mix, although in commercial alloys.

Stainless Steel 317 Plates

Stainless Steel 317 Plates

Stainless Steel 317 Slating Coils have roughly twice the strength compared to austenitic stainless steels and also improved resistance to localized corrosion, particularly pitting, crevice corrosion and stress corrosion cracking. Stainless Steel 317 Perforated Coils are characterized by high chromium (19 % – 32 %) and molybdenum (up to 5 %) and lower nickel contents than austenitic stainless steels.

Stainless Steel 317 Plates Manufacturer In India| Stainless Steel 317 Plates Manufacturer In Mumbai | Stainless Steel 317 Plates Exporter In India | Stainless Steel 317 Plates Exporter In Mumbai | Stainless Steel 317 Plates Supplier In India| Stainless Steel 317 Plates Supplier In Mumbai| Stainless Steel 317 Plates Stockist In India| Stainless Steel 317 Plates Stockist In Mumbai

The properties of 317 Stainless Steel Sheets are achieved with overall lower alloy content than similar – performing super – austenitic grades, making their use cost – effective for many applications. Any oxidation that forms on the surface (mill scale) of 317 Stainless Steel Plates is removed by pickling, and a passivation layer is created on the surface.

Stainless Steel 317 Sheet, Plate & Coil Specifications

Specifications : ASTM A240 / ASME SA240
Thickness : 4mm-100mm
Width
: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

SS 317 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.845 min

Stainless Steel 317 Sheets, Plates & Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317

SS 317 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 317 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 317 Plates
Stainless Steel 317 Plates 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Plates, Sheets, Coils, which is quenched and magnetic. Stainless steels are not as corrosion – resistant as the other two classes but are extremely strong and tough, as well as highly machinable, and can be hardened by heat treatment.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5