Stainless Steel 321 Coils Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 321 Coils, Sheets And Plates, which responds well to hardening by cold working. The amount of titanium content required in Stainless Steel 321 Sheets is indicative of the product percentage of carbon. Stainless Steel 321 Plates is generally used for parts which are intermittently heated up to 1500 deg F along with for continuous service the alloy is good to 1650 deg F. The high corrosion resistance of Stainless Steel 321 Coils is based on the formation of a homogeneous, compact passive layer on the surface.

Stainless Steel 321 Coils Manufacturer In India | Stainless Steel 321 Coils Manufacturer In Mumbai  | Stainless Steel 321 Coils Exporter In India | Stainless Steel 321 Coils Exporter In Mumbai | Stainless Steel 321 Coils Supplier In India | Stainless Steel 321 Coils Supplier In Mumbai | Stainless Steel 321 Coils Stockist In India | Stainless Steel 321 Coils Stockist In Mumbai 
Stainless Steel 321 Coils
Stainless Steel 321 Coils

Stainless Steel 321H Sheets has good welding characteristics; and post-weld annealing is not normally required to restore its excellent performance in a wide range of corrosive conditions. Stainless Steel 321H Plates is used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.

Stainless Steel 321H Coils is then quench-annealed as rapidly as possible generally in clean water, but thin sections can be air cooled, this being necessary to suppress any re-formation of chromium carbide which would occur if the material was allowed to slow cool in the furnace etc. as with standard annealing procedures. Stainless Steel 321H Slating Coils is a stabilized austenitic stainless steel similar to Type 304 but with a titanium addition of at least five times the carbon content.

Stainless Steel 321/321H Sheet, Plate & Coil Specifications

Specifications : ASTM A240 / ASME SA240
Thickness : 4mm-100mm
Width
: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

SS 321/321H Plate, Sheet & Coil Chemical Composition

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Stainless Steel 321/321H Sheets, Plates & Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 321/321H Stainless Steel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

SS 321/321H Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 321/321H Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

  • • Commercial Invoice which includes HS Code
    • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
    • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
    • Fumigation Certificates
    • Raw Material Test Reports
    • Material Traceability Records
    • Quality Assurance Plan (QAP)
    • Heat Treatment Charts
    • Test Certificates certifying NACE MR0103, NACE MR0175
  • • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
    • Guarantee Letter
    • NABL approved Laboratory Test Reports
    • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
    • Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 321 Coils
Stainless Steel 321 Coils

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 321 Coils, Sheets And Plates, which responds well to hardening by cold working. The amount of titanium content required in Stainless Steel 321 Sheets is indicative of the product percentage of carbon.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply