Stainless Steel 310 Washers Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Washers, which results in less internal stress and, most important, a deeper hardened zone in the work – piece. Alloying elements have a strong influence on heat-treating; because SS 310 Flat Washers tend to slow the diffusion of atoms through the iron lattices and thereby delays the allotropic transformations. This means, for example, that the extremely hard martensite of Stainless Steel 310S Lock Washers, which is normally produced by fast quenching, can be produced at lower cooling rates.

Stainless Steel 310 Washers Manufacturer In India | Stainless Steel 310 Washers Manufacturer In Mumbai | Stainless Steel 310 Washers Exporter In India | Stainless Steel 310 Washers Exporter In Mumbai | Stainless Steel 310 Washers Supplier In India | Stainless Steel 310 Washers Supplier In Mumbai | Stainless Steel 310 Washers Stockist In India | Stainless Steel 310 Washers Stockist In Mumbai
Stainless Steel 310 Washers
Stainless Steel 310 Washers

Improved hardenability of Stainless Steel 310 Sealing Washers is achieved by adding such elements as manganese, molybdenum, chromium, nickel, and boron. These alloying agents in SS 310S Split Washers also permit tempering at higher temperatures, which generates better ductility at the same hardness and strength. The testing of properties in Stainless Steel 310 Slot Washers often begins with checking hardness.

Stainless Steel 310S Machine Washers is measured by pressing a diamond pyramid or a hard steel ball into the steel at a specific load. Tensile and yield strength of SS 310 Star Washers are determined by pulling a standardized machined sample in a special hydraulic press and recording the pulling force at increasing elongations until the sample breaks. The elongation of SS 310S Spring Washers, and the way the fracture looks, is good indications of the steel’s ductility.

SS 310/310S Washer Specifications

Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : M02 to M33
Size : 3 mm to 200 mm
Type : Flat Washer, Lock Washer, Sealing Washer, Split Washer, Slot Washer, Machine Washer, Star Washer SPRINGS – Wire Spring & Flat Spring

310/310S Stainless Steel Washers Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 – 26.00 0.10 max 19.00 – 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 0.75 max 19.00 – 21.00 53.095 min

Stainless Steel 310 Washer Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310 Stainless Steel Washer

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21

SS 310/310S Washers Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

310/310S Steel Washers Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 310 Washers
Stainless Steel 310 Washers Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Washers, which results in less internal stress and, most important, a deeper hardened zone in the work – piece. Alloying elements have a strong influence on heat-treating; because SS 310 Flat Washers tend to slow the diffusion of atoms through the iron lattices and thereby delays the allotropic transformations.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply