Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Tube to Female Pipes, which are either placed into the ladle before tapping or are injected into the tapping stream. The carrying out of metallurgical reactions in Stainless Steel 310 Tube Fittings is a common practice in practically all steelmaking shops, because it is cost – efficient to operate the primary furnace as a high – speed melted and to adjust the final chemical composition and temperature of the steel after tapping. Also, certain metallurgical reactions in Stainless Steel 310S Compression Tube Fittings, for reasons of equipment design and operation, are more efficiently performed in the ladle.

Stainless Steel 310 Tube to Female Pipes

Stainless Steel 310 Tube to Female Pipes

The simplest form of treatment in Stainless Steel 310 Female Fittings takes place when the mixing effect of the tapping stream is used to add deoxidizers, slag formers, and small amounts of alloying agents. De – oxidation reactions carried out in Stainless Steel 310S Ferrule Tube Fittings are exothermic and thus raise the temperature of the liquid steel.

Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes 

Stainless Steel 310 Double Ferrule Tube Fittings also loses heat by radiation from the top surface, by heating of the ladle lining, and by heat flux through the lining and shell. Temperature in these SS 310S Female Tube Fittings drops that take place when just holding the steel can range from 0.3 Degree C to 2 Degree C per minute.

Stainless Steel 310S Tube to Female Pipes Specifications

Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

310 Stainless Steel Tube to Female Pipes Fitting Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
310
min. 24.0 19.0
max. 0.25 2.0 1.50 0.045 0.030 26.0 22.0

Stainless Steel 310 – 310S Tube to Female Pipes Fitting Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
310 – 310S 515 205 40 95 217

Stainless Steel 310 – 310S Tube to Female Pipes Fitting Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
310 – 310S 7750 200 15.9 16.2 17.0 14.2 18.7 500 720

Equivalent Grades for 310 – 310S Stainless Steel Tube to Female Pipes Fitting

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
310 – 310S S31000/S31008 1.4841/1.4845 SUS 310 – 310S

SS 310/310S Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 310/310S Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 310 Tube to Female Pipes
Stainless Steel 304H Tube to Female Pipes 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Tube to Female Pipes, which are either placed into the ladle before tapping or are injected into the tapping stream.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5