You are currently viewing Stainless Steel 310 Angle Manufacture
Stainless Steel 310 Angle

Stainless Steel 310 Angle Manufacture

 

Sachiya Steel International is one of the Leading Manufacture and Exporter for Stainless Steel 310 Angle, which does not have flaws but that welded has an inherent flaw throughout the length of each tube, as stated above. Form and manufacturing method of Stainless Steel 310 Angle has its own inherent problems and potential defects. Intuitively SS 310S Angle is easily accepted by purchasers and designers with limited experience with the various products.

The simplest way to solidify Stainless Steel 310 C-Channel is to pour it into heavy, thick – walled iron ingot moulds, which stand on stout iron plates called stools. Nickel is what makes SS 310S C-Channel highly corrosion resistant in the form of the 300 series. Stainless Steel 310 H-Beam is high chromium carbon steels that are not as fully corrosion resistant in spite of their inclusion in the category of different alloys. SS 310S H-Beam shows slight corrosion (rust spotting) when left in water for a period of time or when water dries out on them.

Stainless Steel 310 Angle | Stainless Steel 310 Angle | Stainless Steel 310 Angle | Stainless Steel 310 Angle | Stainless Steel 310 Angle | Stainless Steel 310 Angle | Stainless Steel 310 Angle

Chromium also induces ferromagnetism Stainless Steel 310 I-Beam which is not desired in some of the applications, Nickel also helps in countering this problem. We use the finest quality of raw material to produce SS 310S I-Beam, which is capable of producing large and customized order from our client around the world. Stainless Steel 310 T-Beam can be used safely at these temperatures without loss of room temperature impact resistance.

 

SS 310/310S Angle, Channel, Beam, Chain Specifications

Specifications : ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 310 Angle
: 5mm to 9mm
SS 310 Channel
: 40mm*20mm~300mm*300mm
SS 310 Beam : 3″ thru 12.31″
SS 310 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

 

310/310S Stainless Steel Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 310 0.015 max 2 max 0.15 max 0.20 max 0.015 max 24-26 0.15 max 19-21 54.7 min
SS 310S 0.08 max 2 max 1.0 max 0.045 max 0.030 max 24 – 26 0.75 max 19 – 21 53.095 min

Stainless Steel 310/310S Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310/310S Stainless Steel Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
 SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21

 

SS 310/310S Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

310/310S Steel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 310 Angle
jindal stainless steel angle 500x500 1

Sachiya Steel International is one of the Leading Manufacture and Exporter for Stainless Steel 310 Angle, which does not have flaws but that welded has an inherent flaw throughout the length of each tube

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply