Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Coils, Sheets And Plates to the respected patrons. Nickel 200 Sheets (UNS N02200) has a low annealed rigidity and extremely low work – toughening rate. Nickel 200 Plates is used in food handling machinery, general corrosion – resistant structures and parts, caustic solutions, etc. Nickel 200 Coils is chosen with beyond 315 Degree C, for the reason that of its enhanced resistance to “creep.” Nickel 200 Slating Coils is ferromagnetic and has comparatively low electrical resistivity, which consists of low carbon version of the alloy.
Nickel Alloy 200 Coils Manufacturer In India| Nickel Alloy 200 Coils Manufacturer In Mumbai| Nickel Alloy 200 Coils Exporter In India| Nickel Alloy 200 Coils Exporter In Mumbai| Nickel Alloy 200 Coils Supplier In India| Nickel Alloy 200 Coils Supplier In Mumbai| Nickel Alloy 200 Coils Stockist In India| Nickel Alloy 200 Coils Stockist In Mumbai
By means of Nickel 200 Perforated Coils, the limitations of both alloys are merged into a solitary dual chemistry that outcomes in a distinct alloy by means of the finest features of both. Meanwhile, these Alloy 200 Sheets are also being offered in different sizes and shapes to our customers. Alloy 200 Plates is combined with higher creep properties at temperature and unsullied to form incredibly powerful and ductile.
The unsullied of Alloy 200 Coils has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing Sulphur gases don’t seem to be gift. The high metal and nickel contents of Alloy 200 Slating Coils offer comparable corrosion resistance, superior resistance to oxidization. Therefore the retention of Alloy 200 Perforated Coils has a bigger fraction of temperature strength than the common solid solution alloys like 304.
Nickel 200 Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM / ASME SB 168 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Nickel 200 Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 200 Sheets, Plates & Coils Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Equivalent Grades for 200 Nickel Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
Nickel 200 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Nickel 200 Sheets, Plate & Coils Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Nickel Alloy 200 Coils
Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Coils, Sheets And Plates to the respected patrons. Nickel 200 Sheets (UNS N02200) has a low annealed rigidity and extremely low work – toughening rate. Nickel 200 Plates is used in food handling machinery, general corrosion – resistant structures and parts, caustic solutions, etc.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5