Sachiya Steel International is one of the Leading Manufacture And Exporter Of High Quality C45 Carbon Steel Coil, Sheets And Plates, which is also used in domestic, professional or industrial areas. The alloying elements in C45 Carbon Steel Plates tend to form either solid solutions or compounds or carbides, where these alloying elements also have an effect on the eutectoid temperature of the steel. Manganese and nickel in SC 45 Carbon Steel Coils lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements the austenitic structure of C45 Carbon Steel Slating Coils may be obtained at room temperature.

C45 Carbon Steel Coil Manufacturer In India | C45 Carbon Steel Coil Manufacturer In Mumbai | C45 Carbon Steel Coil Exporter In India | C45 Carbon Steel Coil Exporter In Mumbai | C45 Carbon Steel Coil Supplier In India | C45 Carbon Steel Coil Supplier In Mumbai | C45 Carbon Steel Coil Stockist In India

Sachiya Steel International is one of the well – known for high quality of SC 45 Carbon Steel Perforated Coils, which covers nominal wall and minimum wall seamless ferrite steel pipe intended for high temperature service. Carbide – forming elements in C45 CS Plates raise the eutectoid temperature, where these elements are known as ferrite stabilizing elements. Deposition of complex and heavy organic compounds of SC 45 CS Coils in crude and heavy oil can cause a number of severe problems up to pipeline blocking.

C45 Carbon Steel Coils

C45 Carbon Steel Coils

 

C45 CS Slating Coils are developed for energy – related applications involving oil and gas drilling and therefore are subjected to stresses in machine parts. The easily exchangeable test pipeline in SC 45 CS Perforated Coils is filled with the sample and cooled down to a set temperature.

C45 Plates Specifications

Thickness : 2-600mm
Width
: 4200-11000mm
Length
: 3000-18000mm
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

C45 Plates Chemical Composition

Grade C Mn P S Cr Si
C45 0.42-0.50 0.50-0.80 0.025 max 0.025 max 0.20-0.40 0.15-0.35

C45 Sheets, Plates Mechanical Properties

Grade Condition Yield Strength
R°(Mpa)
Tensile Strength
Rm
(Mpa)
Elon-
gation
A5(%)
Hardness
HRC
Quenching
Temperature
(℃)
Benda-
bility
Nominal Thickness,t
1.95mm≤t≤10.0mm
Rolled Annealed
C45 Rolled
Annealed
Water-quenched
Oil quenched
460
330
750
540
2270
1980
18
30
58
55
820
860
Min.reco-mmended
Bending radius
(≤90°)
2.0
×t
1.0×t

C45 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

C45 Sheets, Plate Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

C45 Carbon Steel Coils
C45 Carbon Steel Coil Manufacturer 1

Sachiya Steel International is one of the Leading Manufacture And Exporter Of High Quality C45 Carbon Steel Coils, Sheets And Plates, which is also used in domestic, professional or industrial areas. The alloying elements in C45 Carbon Steel Plates tend to form either solid solutions or compounds or carbides, where these alloying elements also have an effect on the eutectoid temperature of the steel

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5