Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Monel Alloy 400 Sheets, Plates and Coils, where it is the responsibility of our group members to inspect these products for any form of finishing defect in that way achieving utmost serenity of the clienteles. Monel 400 Sheets is used for hydrocarbon and chemical processing equipment, marine engineering, shafts, fittings, valves, pumps, fasteners, and heat exchangers. These Monel 400 Plates is used in chemical plant machinery, for the reason that of its excellent corrosion resistance. Monel 400 Coils shows first – rate corrosion resistance and soaring strength in a variety of alkaline and acidic atmospheres and it’s particularly appropriate for reducing environments.

Monel Alloy 400 Sheets

Monel Alloy 400 Sheets

The machinability of these Monel 400 Slating Coils (UNS N04400) is hard as it works-toughens throughout machining. Meanwhile, Monel 400 Perforated Coils are also being offered in different sizes and shapes to our customers. While these Alloy 400 Sheets has a number of advantages, it is far from the perfect metal. The machinability of Alloy 400 Plates is poor because of their tendency to quickly work – harden. These Alloy 400 Coils could also be easily welded, soldered, and brazed, which also has excellent mechanical properties at subzero temperatures.

Monel Alloy 400 Sheets Manufacturer In India| Monel Alloy 400 Sheets Manufacturer In Mumbai | Monel Alloy 400 Sheets Exporter In India| Monel Alloy 400 Sheets Exporter In Mumbai| Monel Alloy 400 Sheets Supplier In India| Monel Alloy 400 Sheets Supplier In Mumbai| Monel Alloy 400 Sheets Stockist In India| Monel Alloy 400 Sheets Stockist In Mumbai

Strength and hardness Alloy 400 Slating Coils gets increased with only slight impairment of ductility or impact resistance. These Alloy 400 Perforated Coils does not undergo a ductile – to – brittle transition even when cooled to the temperature of liquid hydrogen.

Monel 400 Sheet, Plate & Coil Specifications

Specifications : ASTM / ASME SB 127
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Monel 400 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min

Monel 400 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for 400 Monel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Monel 400 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel 400 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Monel Alloy 400 Sheets
Monel Alloy 400 Sheets Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Monel Alloy 400 Sheets, Plates and Coils, where it is the responsibility of our group members to inspect these products for any form of finishing defect in that way achieving utmost serenity of the clienteles.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5