Monel Alloy 400 Channel Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Channel, Angle, Beam, and Chain. Subject to your requirements we can offer you the product in a variety of grades, sizes, standards, lengths, forms, and types. With Government-approved Labs, we test our product through numerous quality testing for quality products. Doorstep Delivery with Standard Shipping Method. 

Monel Alloy 400 Channel Manufacturer In India | Monel Alloy 400 Channel Manufacturer In Mumbai | Monel Alloy 400 Channel Exporter In India | Monel Alloy 400 Channel Exporter In Mumbai | Monel Alloy 400 Channel Supplier In India | Monel Alloy 400 Channel Supplier In Mumbai | Monel Alloy 400 Channel Stockist In India | Monel Alloy 400 Channel Stockist In Mumbai
Monel Alloy 400 Channel
       Monel Alloy 400 Channel

Monel 400 has excellent mechanical properties at subzero temperatures, can withstand temperatures of up to 1000 ° F, and has a melting point of 2370–2460 ° F. Because of the addition of molybdenum and slightly higher nickel content, these Monel 400 H-Beams are more durable. At low temperatures and concentrations, it has some resistance to hydrochloric and sulfuric acids, but it is rarely the material of choice for these acids.

It is frequently chosen to address SCC issues that may arise with stainless 316L because Monel 400 C-Channels exhibit excellent corrosion resistance, are particularly suitable for reducing conditions, and exhibit excellent resistance to rust. Our Monel Alloy 400 Chains (UNS N04400) have a low rate of corrosion in seawater combined with excellent resistance to stress-corrosion cracking in the majority of freshwater. This resistance to a variety of corrosive conditions has led to its widespread use in marine applications and other non-oxidizing chloride solutions.

Our Monel 400 T-Beam is widely used in a wide range of applications such as valves, pumps, shafts, marine fixtures, fasteners, electrical and electronic components, processing equipment, petroleum refining and production equipment, feed water heaters, and other heat exchangers. Monel 400 Angles have low carbide precipitation during welding, excellent mechanical properties, and fabricability.

Monel 400 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM B164 / ASME B164
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Monel 400 Angle
: 5mm to 9mm
Monel 400 Channel
: 40mm*20mm~300mm*300mm
Monel 400 Beam : 3″ thru 12.31″
Monel 400 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

400 Monel Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si Cu Fe Ni S
Monel 400 0.30 max 2.00 max  0.50 max 28.00 – 34.00  2.50 max 63.00 min 0.024 max

Monel Alloy 400 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35000 , MPa – 240 40%

Equivalent Grades for 400 Monel Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS JIS GOST BS AFNOR EN
Monel 400 2.4360 N04400 NW 4400 МНЖМц 28-2,5-1,5  NA 13 NU-30M NiCu30Fe

Monel 400 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing 
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

400 Alloy Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Monel Alloy 400 Channel
Monel Alloy 400 Channel

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Channel, Angle, Beam, and Chain. Subject to your requirements we can offer you the product in a variety of grades, sizes, standards, lengths, forms, and types. With Government-approved Labs, we test our product through numerous quality testing for quality products. Doorstep Delivery with Standard Shipping Method. 

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply