Inconel 600 Tube to Female Pipes Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 600 Tube to Female Pipes, which can be formed both ways i.e. cold – formed and hot – formed by different processes. Inconel 600 Tube Fittings is a superior choice for chemical processing equipment, heat treating muffles and retorts. Inconel 600 Compression Fittings is used in chemical processing, food processing, phenol condensers, heat treating, soap manufacture, vegetable vessel, fatty acid vessels, and so on. Above this temperature in Inconel 600 Female Connector Fittings, grain growth may be objectionable, although very brief heating at 1900 Degree F will cause complete softening without undue grain growth.

Inconel 600 Tube to Female Pipes | Inconel 600 Tube to Female Pipes | Inconel 600 Tube to Female Pipes | Inconel 600 Tube to Female Pipes | Inconel 600 Tube to Female Pipes | Inconel 600 Tube to Female Pipes
Inconel 600 Tube to Female Pipes
Inconel 600 Tube to Female Pipes

Typical of other nickel alloys, heavy – duty equipment in Inconel 600 Ferrule Fittings should be used along with sharp tooling and more than adequate cooling. Inconel 600 Double Ferrule Fittings is also used in evaporator tubes, flaking trays and tube sheets for the manufacture of sodium sulfide. Typical applications of Inconel 600 Compression Tube Fittings include the chemical, aerospace, pulp and paper, heat treating and nuclear engineering industries. Alloy 600 Tube Fittings is as well used in springs, lock wire, seals, reactor vessels, fixtures machinery, process equipment, furnace seals fans.

Alloy 600 Compression Fittings is a Nickel – Chromium – Iron alloy with good corrosion resistance, high strength at high temperatures and good oxidation resistance. Alloy 600 Female Connector Fittings basically offers good oxidation and corrosion resistance at a very high temperature range.

Inconel 600 Tube to Female Pipes Specifications

Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 6000 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.

600 Inconel Alloy Tube to Female Pipes Fitting Chemical Composition

Grade C Mn Si Fe S Cr Cu Ni
600 min. 6.0 14.0 72.0
max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5

Inconel Alloy 600 Tube to Female Pipes Fitting Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
600 Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40

Equivalent Grades for 600 Inconel Tube to Female Pipes Fitting

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 600 N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600

Inconel Alloy 600 Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 600 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Inconel 600 Tube to Female Pipes
Inconel 600 Tube to Female Pipes Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 600 Tube to Female Pipes, which can be formed both ways i.e. cold – formed and hot – formed by different processes.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply