Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 800 Tube to Female Pipes, which has excellent creep strength at temperatures above 1290 Degree F (700 Degree C). Incoloy 800 Tube Fittings is often used in Ethylene furnace quench boilers, Hydrocarbon cracking, Valves, fittings and other components exposed to corrosive attack from 1100 Degree F – 1800 Degree F. Incoloy 800H Tube Fittings is also used in Heat exchangers and process piping, along with Carburizing fixtures and retorts. For applications in Incoloy 800HT Tube Fittings requiring greater resistance to stress rupture and creep, especially at temperatures above 1500 Degree F (816 Degree C), 800HT are used.
Incoloy 800 Tube to Female Pipes
Machining characteristics of Incoloy 800 Compression Fittings are similar to that of iron – based alloys. For high temperature applications requiring optimum rupture and creep properties, Incoloy 800H Compression Fittings are used. Incoloy 800HT Compression Fittings has always been known to contain properties for high temp strength and resistance to carburization, oxidation and other high temp corrosion.
Incoloy 800 Tube to Female Pipes Manufacturer In India | Incoloy 800 Tube to Female Pipes Manufacturer In Mumbai| Incoloy 800 Tube to Female Pipes Exporter In India | Incoloy 800 Tube to Female Pipes Exporter In Mumbai | Incoloy 800 Tube to Female Pipes Supplier In Mumbai| Incoloy 800 Tube to Female Pipes Stockist In India
These additions allow Incoloy 800 Female Connector Fittings to adapt to the needs of a variety of industries and enable leading metal companies to offer a range of Incoloy shapes and designs. Alloy 800 Tube Fittings is used in the heat processing equipment, industrial incinerators, chemical processing industries etc. In hot or concentrated solutions, rates of Alloy 800 Compression Fittings are usually too high for reasonable service life.
Incoloy 800/800H/800HT Tube to Female Pipes Specifications |
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 800/800H/800HT0 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
800/ 800H/ 800HT Incoloy Alloy Tube to Female Pipes Fitting Chemical Composition
| Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
| 800 | min. | – | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
| 800H | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
| 800HT | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 | |
Incoloy Alloy 800/ 800H/ 800HT Tube to Female Pipes Fitting Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 800-H-HT | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 | – | – |
Equivalent Grades for 800 / 800H / 800HT Incoloy Tube to Female Pipes Fitting
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Incoloy Alloy 800/800H/800HT Tube to Female Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Incoloy 800/800H/800HT Tube to Female Pipes Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Incoloy 800 Tube to Female Pipes
Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 800 Tube to Female Pipes, which has excellent creep strength at temperatures above 1290 Degree F (700 Degree C).
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5