Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Plate, Sheet And Coil, where our offered collection is confirmed to be in obedience by means of the international quality standards. Incoloy 800 Sheets is a nickel – iron – chromium alloy by means of good resistance to oxidation, carburization at high temperatures and moderate strength. In power generation, re – heater and super – heater tubing has engaged these Incoloy 800 Plates.

Incoloy 800 Plate

Incoloy 800 Plate

Meanwhile, these Incoloy 800 Coils are resistance to protracted exposure to high temperatures. Incoloy 800H Sheets is very much serviceable as it upholds a stable construction, even when unprotected to soaring temp. Meanwhile, these Incoloy 800H Plates are also being offered in different sizes and shapes to our customers. Incoloy 800HT Coils perform well in sodium salt and other molten salt environments, with stress corrosion cracking resistance surpassing standard austenitic stainless steels.

Incoloy 800 Plate Manufacturer In India | Incoloy 800 Plate Manufacturer In Mumbai  | Incoloy 800 Plate Exporter In India| Incoloy 800 Plate Exporter In Mumbai  | Incoloy 800 Plate Supplier In India | Incoloy 800 Plate Supplier In Mumbai | Incoloy 800 Plate Stockist In India | Incoloy 800 Plate Stockist In Mumbai | 

Incoloy 800 Slating Coils has excellent resistant to oxidation and carburization in high temperature environments. Incoloy 800HT Perforated Coils has a restricted chemistry, within the limits of Incoloy 800H Perforated Coils, and requires a heat treatment of 2100 Degree F (1149 Degree C) minimum. Alloy 800HT Coils is also used for valves, fittings and other components exposed to corrosive attack from 1100 Degree F to 1800 Degree F. Alloy 800 Sheets Plates with a standard anneal is recommended for service below 1100 Degree F (600 Degree C).

 

Incoloy 800/800H/800HT Sheet, Plate & Coil Specifications

Specifications : ASTM / ASME SB 409
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Incoloy 800/800H/800HT Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Alloy 800/800H/800HT Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800/800H/800HT Incoloy Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Incoloy 800/800H/800HT Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 800/800H/800HT Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Incoloy 800 Plate
inconel plate supplier

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Plate, Sheet And Coil, where our offered collection is confirmed to be in obedience by means of the international quality standards.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5