You are currently viewing Incoloy 800 Angle Manufacture
Incoloy 800 Angle

Incoloy 800 Angle Manufacture

Sachiya Steel International offers a wide quality range of Incoloy 800 Angle , which will stave off erosion in a number of aqueous atmospheres. Incoloy 800 Angle is often used in Heat exchangers, Pressure vessels, super – heater and re – heaters in power plants. The nickel content maintains a ductile and austenitic structure; as a result, our Incoloy 800H Angle is readily formed, machined and welded.

The high percentage of nickel maintains an austenitic structure so that Incoloy 800HT Angle is ductile, which can be welded by common welding techniques by using a matching filler metal. Our Incoloy 800 C-Channel is a nickel – iron – chromium alloy with the supreme resistance to corrosion, which is also used in extruded tubing for ethylene and steam methane reforming furnaces.

Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle

Incoloy 800HT H-Beam remains available, subject to commercial considerations, and certain specifications which restrict the service temperature of Incoloy 800H H-Beam. Our Incoloy 800HT I-Beam is nickel – iron – chromium alloy having the same basic composition as 800 but with significantly higher creep – rupture strength. This Nickel-Iron-Chromium Alloy 800 H-Beam has good strength and excellent resistance to oxidation and carburization in high temperature atmospheres.

Our Alloy 800H I-Beam maintains a stable and austenitic structure during prolonged exposure to high temperatures. Alloy 800 Chain also remains stable in long term high temperature service. The high temperature resistance of our Alloy 800HT T-Beam is comparable to Alloy 800 T-Beam.

 

Incoloy 800/800H/800HT Angle, Channel, Beam, Chain Specifications

Specifications : ASTM B408 / ASME B408
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Incoloy 800 Angle
: 5mm to 9mm
Incoloy 800 Channel
: 40mm*20mm~300mm*300mm
Incoloy 800 Beam : 3″ thru 12.31″
Incoloy 800 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

 

800/800H/800HT Incoloy Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si Al S Cr Cu Ni Fe
Incoloy 800 0.10 max 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min
Incoloy 800H 0.05 – 0.10 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min
Incoloy 800HT 0.06 – 0.10 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min

Incoloy 800/800H/800HT Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800/800H/800HT Incoloy Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21

 

Incoloy 800/800H/800HT Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas ProceIncoloying
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

800/800H/800HT Steel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

 

Incoloy 800 Angle
steel angle 3 1

Sachiya Steel International offers a wide quality range of Incoloy 800 Angle , which will stave off erosion in a number of aqueous atmospheres.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply