Hastelloy C276 Nipple Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C276 Nipple, which is a non – magnetic and austenitic alloy with high nickel content. Hastelloy C276 Hexagon Reducing Nipple is rather uniquely resistant to wet chloride gas and chlorine solutions, where its properties enable excellent resistance to oxidizing salts. Hastelloy C276 Hexagon Nipple exhibits excellent intermediate temperature tensile ductility, and is not normally subject to strain age cracking problems common for other gamma prime strengthened alloys. Alloy C276 One End Threaded Nipple also resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as – welded condition.

Hastelloy C276 Nipple
Hastelloy C276 Nipple

Hastelloy C276 Both End Threaded Nipple has excellent resistance to pitting and stress corrosion cracking, where its larger sizes are available in welded construction and can also be fabricated to order. Hastelloy C276 Concentric Swaged Nipple with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Its valuable combination of high strength, good corrosion resistance and toughness in both base metals and welds of Hastelloy C276 Eccentric Swaged Nipple gives designers opportunities to add reliability to their products while simplifying fabrication and often reducing costs. Alloy C276 Hexagon Reducing Nipple has good resistance to stress corrosion cracking in the lower strength conditions, where high strength is maintained to approximately 600 Degree F (316 Degree C).

Hastelloy C276 Nipple

Specifications : ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Alloy C276 Nipple Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

Hastelloy C276 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Equivalent Grades for Hastelloy C276 Nipple

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Hastelloy C276 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy C276 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Reply