You are currently viewing Hastelloy B3 Tube to Male Fittings Manufacturer
Hastelloy B3 Tube to Male Fittings

Hastelloy B3 Tube to Male Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Tube to Male Fittings, which has some admirable features to offer such as durable, fine finish, accurate dimensions, and so on. Hastelloy B3 Tube Fittings has a special understanding deliberate to accomplish a level of thermal stability that is significantly higher to that of its forerunners. Hastelloy B3 Compression Fittings is not suggested for use in the existence of cupric or ferric salts for the reason that these salts can source untimely failure. Hastelloy B3 Male Connector Fittings has excellent oxidation and creep resistance, and has an unusual chemistry considered attaining superior thermal constancy than Alloy B-2, resulting in stress – free fabrication.

Hastelloy B3 Ferrule Fittings (UNS N10675) has immense resistance to heat – affected and knife – line area attack. Meanwhile, these Hastelloy B3 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers. A comparison of yield strengths for the very high strength conditions in Alloy B3 Male Connector Fittings is exposed along with that of the annealed and “standard” conditions.

Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings

Alloy B3 Tube Fittings, does not recommend use of highly cold worked and aged material because the increase in yield strengths is minimal and the susceptibility to hydrogen embrittlement in severe oil well conditions is increased. While this strength level is almost double of Alloy B3 Compression Fittings in the annealed condition, many oil and gas applications require even greater strength.

Hastelloy B3 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Hastelloy, 300/1000/3000PSI for Brass

Hastelloy Alloy B3 Tube To Male Fittings Chemical Composition

Grade C Mn Si Al P Fe Mo Ni Cr Ti W V
Hastelloy B3 0.01 max 3.0 max 10 max 0.50 max 1.5 28.5 65.0 min 1.5 0.2 max 3.0 max

Hastelloy B3 Tube To Male Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%

Equivalent Grades for B3 Hastelloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS EN
Hastelloy B3 2.4600 N10675

Alloy B3 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B3 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy B3 Tube to Male Fittings
tube adapters 2

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Tube to Male Fittings, which has some admirable features to offer such as durable, fine finish, accurate dimensions, and so on.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply