Copper Nickel 70 Hydraulic Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Copper Nickel 70 Hydraulic Fittings, which are commonly specified in heat exchanger or condenser tubes in a wide variety of marine applications. Welding Cu-Ni 70 / 30 Hydraulic Fittings can be welded using gas shielded arc welding, spot welding, coated metal arc welding, butt welding, seam welding, brazing, soldering, and oxyacetylene welding processes. Deoxidised Cupro Nickel 70 / 30 Hydraulic Type Fittings (usually deoxidised with phosphorus) is a material that can be readily brazed or welded without fear of embrittlement.

Copper Nickel 70 Hydraulic Fittings Manufacturer In India | Copper Nickel 70 Hydraulic Fittings Manufacturer In Mumbai | Copper Nickel 70 Hydraulic Fittings Exporter In India | Copper Nickel 70 Hydraulic Fittings Exporter In Mumbai | Copper Nickel 70 Hydraulic Fittings Supplier In India | Copper Nickel 70 Hydraulic Fittings Supplier In Mumbai | Copper Nickel 70 Hydraulic Fittings Stockist In India | Copper Nickel 70 Hydraulic Fittings Stockist In Mumbai
Copper Nickel 70 Hydraulic Fittings
        Copper Nickel 70 Hydraulic                             Fittings

Copper Nickel 70 / 30 Hydraulic Type Fittings are durable, corrosion resistant and available in different grades, thicknesses and dimensions. Three sets of strain – cycled fatigue tests have been conducted at three laboratories on wrought Cu-Ni 70 / 30 Hydraulic Type Fittings. The main wrought Cupro Nickel 70 / 30 Forged Hydraulic Fittings chosen for seawater service contain 30 % Nickel. A laboratory investigation was carried out on the effect of sulfate – reducing bacteria (SRB) and inorganic sulfide on the corrosion behavior of Copper Nickel 70 / 30 Forged Hydraulic Fittings in seawater.

These Cu-Ni 70 / 30 Forged Hydraulic Fittings for Marine application are very important for all Industrial fields. We supply UNS C71500 Hydraulic Fittings for industries all throughout the India and the world. UNS C71500 Hydraulic Type Fittings is used for a variety of industries; including marine environments, power generation, offshore, oil & gas and defence sectors.

Cupro Nickel 70/30 Hydraulic Fittings Specifications

Specification : ASTM B122 / ASME SB122
Size Range : 1/16”OD to 2”OD, 2mm OD to 50mm OD
Thread : NPT , BSPT, BSPP
End : Threaded, Welding, JIC
Pressure Rating : 3000 & 6000
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting

Cupro Nickel 70/30 Hydraulic Fittings Chemical Composition

Grade Cu Mn Pb Ni Fe Zn
Cupro Nickel 70/30 65 min 1.0 max 0.05 max 29-33 max 0.4-1.0 max 1 max

Copper Nickel 70/30 Hydraulic Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %

Equivalent Grades for Cu-Ni 70-30 Hydraulic Tube Fittings

STANDARD WERKSTOFF NR. UNS
Cupro Nickel 70/30 2.0882 C71500

Copper Nickel 70/30 Hydraulic Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Cupro Nickel 70/30 Hydraulic Tube Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Copper Nickel 70 Hydraulic Fittings
Copper Nickel 70 Hydraulic Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Copper Nickel 70 Hydraulic Fittings, which are commonly specified in heat exchanger or condenser tubes in a wide variety of marine applications. Welding Cu-Ni 70 / 30 Hydraulic Fittings can be welded using gas shielded arc welding, spot welding, coated metal arc welding, butt welding, seam welding, brazing, soldering, and oxyacetylene welding processes. Deoxidised Cupro Nickel 70 / 30 Hydraulic Type Fittings (usually deoxidised with phosphorus) is a material that can be readily brazed or welded without fear of embrittlement.

Product Brand: Sachiya Steel International

Product Currency: INR

Product Price: 80

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply