Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality ASTM A515 Gr 60 Sheets, Plates, Coils, where examples of its applications are lock wire, exhaust liners, and turbine seals. Iron base high-temperature alloy such as ASTM A515 Gr. 60 Carbon Steel Plates using temperature normally only up to 750 Degree D – 780 Degree C, in the higher temperature of the heat used parts, used the nickel refractory metal.
Laboratory tests of ASME SA 515 Gr. 60 Carbon Steel Coils at 200 Degree C (390 Degree F) in contaminated 95 % super phosphoric acid showed corrosion rates. Light forming of ASTM A515 Gr. 60 Carbon Steel Slitting Coils can be done at temperatures down to 1600 Degree F (870 Degree C). Above about 20 % sulphuric acid, ASME SA 515 Gr. 60 Carbon Steel Perforated Coils is even more resistant than stainless steel. The behavior of ASTM A515 Gr. 60 CS Plates during cold forming is similar to that of other alloys.
ASTM A515 Gr 60 Sheets Manufacturer In India | ASTM A515 Gr 60 Sheets Manufacturer In Mumbai| ASTM A515 Gr 60 Sheets Exporter In India| ASTM A515 Gr 60 Sheets Exporter In Mumbai | ASTM A515 Gr 60 Sheets Supplier In India | ASTM A515 Gr 60 Sheets Supplier In Mumbai| ASTM A515 Gr 60 Sheets Stockist In India | ASTM A515 Gr 60 Sheets Stockist In Mumbai
The usual annealing temperature of ASME SA 515 Gr. 60 CS Coils is approximately 1900 Degree F (1040 Degree C). In the aeronautical field, ASTM A515 Gr. 60 CS Slating Coils is used for various engine and airframe components that must withstand high temperatures. In various types of high–temperature water, ASME SA 515 Gr. 60 CS Perforated Coils displays low corrosion rates and excellent resistance to stress–corrosion cracking.
ASTM A515 Grade 60 Plates Specifications |
||
| Specifications | : | ASTM A515 |
| Thickness | : | 8-100mm |
| Width |
: | 1500-3500mm |
| Length |
: | 3000-8000mm |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, etc. |
| Production | : | Hot-Rolled (HR) |
| Heat Treatment | : | Rolled/Normalized/N+T/QT |
ASTM A515 Grade 60 Plates Chemical Composition
| Grade | C | Mn | P | S | Si |
| A515 Grade 60 | 0.24-0.31 | 0.98 max | 0.035 max | 0.035 max | 0.13-0.45 |
ASTM A515 Grade 60 Sheets, Plates Mechanical Properties
| Grade | Thickness | Yield | Tensile | Elongation |
| A515 Grade 60 | 50-200mm | MPa -220 min | MPa – 415-550 | 21-25% |
A515 Grade 60 Carbon Steel Plate Thickness Chart
| Thickness in Inches | Width | Length | Lbs/Sft |
| 3/16 | 48, 60, 72, 84, 96 | 96, 120, 124,133, 144, 156, 240 | 7.660 |
| 1/4 | 48, 60, 72, 84, 96 | 96,110, 120, 144, 240 | 10.210 |
| 5/16 | 48, 60, 72, 96 | 96, 120, 240 | 12.760 |
| 3/8 | 48, 60, 72, 84, 96 | 96, 120, 144, 169, 240, 260 | 15.320 |
| 7/16 | 96 | 240 | 17.870 |
| 1/2 | 48, 60, 72, 84, 96 | 96, 120, 144, 240 | 20.420 |
| 5/8 | 48, 96, | 120, 240, 480 | 25.530 |
| 3/4 | 48, 72, 84, 96 | 96, 120, 240, 480 | 30.630 |
| 7/8 | 96 | 240 | 35.740 |
| 1 | 48, 72, 96 | 96, 120, 240, 480 | 40.840 |
| 1 1/8 | 96 | 240 | 45.950 |
| 1 1/4 | 48, 96 | 96, 120, 240 | 51.050 |
| 1 3/8 | 96 | 240 | 56.160 |
| 1 1/2 | 96 | 120, 240 | 61.260 |
| 1 5/8 | 96 | 240 | 66.370 |
| 1 3/4 | 96 | 240 | 71.470 |
| 2 | 96 | 120, 240 | 81.680 |
| 2 1/4 | 96 | 240 | 91.890 |
| 2 1/2 | 96 | 240 | 102.100 |
| 2 3/4 | 96 | 240 | 112.310 |
| 3 | 96 | 240 | 122.520 |
| 3 1/4 | 96 | 144 | 132.730 |
| 3 1/2 | 96 | 120 | 142.940 |
| 3 3/4 | 96 | 120 | 153.150 |
| 4 | 96 | 144, 180 | 163.360 |
| 4 1/4 | 96 | 120 | 173.570 |
| 4 1/2 | 96 | 120 | 183.780 |
| 5 | 96 | 144 | 204.200 |
| 6 | 96 | 120 | 245.040 |
| 7 | 96 | 160 | 285.880 |
Equivalent Material of ASME SA515 GR 60 BQ Plates
| British Standard | European Norm | ASTM/ASME | DIN |
| BS1501-161-430A | EN10028 P265GH | A/SA515 – Grade 60 | DIN 17155 HII |
ASTM A515 Grade 60 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
ASTM A515 Grade 60 Sheets, Plate Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
ASTM A515 Gr 60 Sheets
Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality ASTM A515 Gr 60 Sheets, Plates, Coils, where examples of its applications are lock wire, exhaust liners, and turbine seals.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5