Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel P5 Pipes, which is available at market leading prices. At the same time, by control of carbon and nitrogen, and careful selection of chromium, molybdenum, and tungsten levels, many of the nickel – based alloy corrosion properties, such as of Alloy Steel P5 Seamless Pipes, have been attained. The operating conditions of flue gas desulfurization systems in Alloy Steel P5 Welded Pipes offer a challenging environment for corrosion resistant materials. The hot-working temperature range for Alloy Steel P5 EFW Pipes is 1600 Degree F – 2250 Degree F (870 Degree C – 1230 Degree C).
Alloy Steel P5 Pipes Manufacturer In India | Alloy Steel P5 Pipes Manufacturer In Mumbai | Alloy Steel P5 Pipes Exporter In India | Alloy Steel P5 Pipes Exporter In Mumbai | Alloy Steel P5 Pipes Supplier In India | Alloy Steel P5 Pipes Supplier In Mumbai | Alloy Steel P5 Pipes Stockist In India | Alloy Steel P5 Pipes Stockist In Mumbai
Alloy Steel P5 ERW Pipes should be water quenched after hot working, where heat treatment is recommended after hot working to ensure maximum corrosion resistance. Alloy Steel P5 Round Pipes also performs well in seawater, especially under crevice conditions where other frequently used alloys such as stainless steel. Sigma phase precipitates in Alloy Steel P5 Square Pipes can form after only a few dozen minutes between 1110 Degree F and 1830 Degree F (600 Degree C /1000 Degree C).
The alpha prime precipitate phase in Alloy Steel P5 Rectangular Pipes also presents risk of embrittlement between 660 Degree F and 1020 Degree F (350 Degree C / 550 Degree C). If annealing is carried out in an oxidizing atmosphere, the resulting scaling in Alloy Steel P5 Electropolishes Pipes must then be removed, e.g. by pickling.
Alloy Steel P5 Seamless Pipes Specifications |
||
| Specifications | : | ASTM A 335 ASME SA 335 |
| Dimensions | : | ASTM, ASME and API |
| Size | : | 1/8″NB TO 30″NB IN |
| Schedule | : | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Length | : | Within 13500mm |
| Type | : | Seamless / Fabricated |
| Form | : | Round, Hydraulic Etc |
| Length | : | Single Random, Double Random & Cut Length. |
| End | : | Plain End, Beveled End, Treaded |
Alloy Steel P5 Pipes Chemical Composition
| Alloy Steel P5 | C | Cr | Mn | Mo | P | S | Si |
| 0.05 – 0.15 | 4.00 – 6.00 | 0.30 – 0.60 | 0.45 – 0.65 | 0.025 max | 0.025 max | 0.50 – 1.00 |
Alloy Steel P5 Pipe Mechanical Properties
| Tensile Strength, MPa | Yield Strength, MPa | Elongation |
| 415 min | 205 min | 30 min |
Outside Diameter & Tolerance
| ASTM A450 | Hot rolled | Outside Diameter, mm | Tolerance, mm |
| OD≤101.6 | +0.4/-0.8 | ||
| 101.6＜OD≤190.5 | +0.4/-1.2 | ||
| 190.5＜OD≤228.6 | +0.4/-1.6 | ||
| Cold Drawn | Outside Diameter, mm | Tolerance, mm | |
| OD＜25.4 | ±0.10 | ||
| 25.4≤OD≤38.1 | ±0.15 | ||
| 38.1＜OD＜50.8 | ±0.20 | ||
| 50.8≤OD＜63.5 | ±0.25 | ||
| 63.5≤OD＜76.2 | ±0.30 | ||
| 76.2≤OD≤101.6 | ±0.38 | ||
| 101.6＜OD≤190.5 | +0.38/-0.64 | ||
| 190.5＜OD≤228.6 | +0.38/-1.14 | ||
| ASTM A530 & ASTM A335 | NPS | Outside Diameter, inch | Tolerance, mm |
| 1/8≤OD≤1-1/2 | ±0.40 | ||
| 1-1/2＜OD≤4 | ±0.79 | ||
| 4＜OD≤8 | +1.59/-0.79 | ||
| 8＜OD≤12 | +2.38/-0.79 | ||
| OD>12 | ±1% |
Alloy Steel P5 Seamless / High Pressure Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
P5 Alloy Steel Pipes Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Alloy Steel P5 Pipes
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel P5 Pipes, which is available at market leading prices. At the same time, by control of carbon and nitrogen, and careful selection of chromium, molybdenum, and tungsten levels, many of the nickel – based alloy corrosion properties, such as of Alloy Steel P5 Seamless Pipes, have been attained. The operating conditions of flue gas desulfurization systems in Alloy Steel P5 Welded Pipes offer a challenging environment for corrosion resistant materials. The hot-working temperature range for Alloy Steel P5 EFW Pipes is 1600 Degree F – 2250 Degree F (870 Degree C – 1230 Degree C).
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5