Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 / 310S Sheets Plates Coils, which are produced in small quantities, contain expensive alloys, and are often sold only by the kilogram and by their individual trade names. Generally Stainless Steel 310 Sheets are very hard, wear – resistant, tough, and inert to local overheating, and frequently engineered to particular service requirements. Stainless Steel 310 Plates also have to be dimensionally stable during hardening and tempering. Stainless Steel 310 Coils contain strong carbide formers such as tungsten, molybdenum, vanadium, and chromium in different combinations and often cobalt or nickel to improve high – temperature performance.
In principle, Stainless Steel 310S Sheets are formed into either flat products or long products, both of which have either hot – rolled, cold – formed or coated surface. Stainless Steel 310S Plates are rolled from slabs, which are considered a semi – finished product and are normally not sold. Maximum dimensions of these Stainless Steel 310S Coils vary with available slab sizes or ingot weights and with the sizes of installed rolling mills and auxiliary equipment.
Stainless Steel 310 / 310S Sheets Plates Coils | Stainless Steel 310 / 310S Sheets Plates Coils | Stainless Steel 310 / 310S Sheets Plates Coils | Stainless Steel 310 / 310S Sheets Plates Coils
Stainless Steel 310 Slating Coils are usually made in small quantities and to a customer’s specification, with different dimensions and tolerances for flatness, profile, straightness, and other properties. Environmental impacts are minimized as these Stainless Steel 310S Perforated Coils can be infinitely recycled.
Stainless Steel 310/310S Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM A240 / ASME SA240 |
| Thickness | : | 4mm-100mm |
| Width |
: | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
SS 310/310S Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
| SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
Stainless Steel 310/310S Sheets, Plates & Coils Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 310/310S Stainless Steel Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
SS 310/310S Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 310/310S Sheets, Plate & Coils Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 310 / 310S Sheets
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 / 310S Sheets Plates Coils, which are produced in small quantities, contain expensive alloys, and are often sold only by the kilogram and by their individual trade names.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
Stainless Steel 310 / 310S Sheets
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 / 310S Sheets Plates Coils, which are produced in small quantities, contain expensive alloys, and are often sold only by the kilogram and by their individual trade names.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
