Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Sheet, Plates Coils, which has good characteristics suited to all standard methods. Stainless Steel 310H Sheets are often produced in “Dual Certified” form, which generally are recommended for fusion welding. These Stainless Steel 310H Plates may have a carbon content below 0.04 % which will not be acceptable for some high temperature applications. Stainless Steel 310H Coils is often used in Furnace parts, Oil burner parts, Carburizing boxes, Heat Treatment baskets and jigs, Heat exchangers, Welding filler wire and electrodes. These Stainless Steel 310H Slating Coils are subject to stress corrosion cracking but more resistant than Grades 304 or 316.

Stainless Steel 310H Sheet

Stainless Steel 310H Sheet

The molybdenum in Stainless Steel 310H Perforated Coils gives better overall corrosion resistant properties, particularly higher resistance to pitting and crevice corrosion in chloride environments. These SS 310H Sheets is the standard molybdenum-bearing austenitic grade, second stainless steel in importance to 304. The austenitic structure of SS 310H Plates gives excellent toughness, even down to cryogenic temperatures.

These SS 310H Coils is readily brake or roll formed, welded, soldered and cut by both thermal and mechanical methods. 310H Stainless Steel Sheets is highly resistant to sensitization (grain boundary carbide precipitation) and so is extensively used in heavy gauge welded components (about 5mm and over). These 310H Stainless Steel Coils, with its higher carbon content has some application at elevated temperatures.

Stainless Steel 310H Sheet, Plate & Coil Specifications

Specifications : ASTM A240 / ASME SA240
Thickness : 4mm-100mm
Width
: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

SS 310H Plate, Sheet & Coil Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310H 0.04 – 0.10 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 19.00 – 21.00 53.885 min

Stainless Steel 310H Sheets, Plates & Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%

Equivalent Grades for 310H Stainless Steel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310H S31009

SS 310H Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 310H Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 310H Sheet
Stainless Steel 310H Sheet Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Sheet, Plates Coils, which has good characteristics suited to all standard methods.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5