Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 600 Tube to Male Fittings in various sizes and dimensions, which has Carburization resistance and Oxidation resistance to 2000 Degree F. Heavy duty machining equipment and tooling in Inconel 600 Tube Fittings should be used to minimize chatter or work – hardening of the alloy ahead of the cutting. Besides heat – treating industries, Inconel 600 Compression Fittings is as well used in furnace component, aerospace, pulp and paper, chemical industries and nuclear engineering. Inconel 600 Compression Tube Fittings is a superior choice for: heat exchanger tubing and nuclear reactor vessels.
Typical corrosion applications of Inconel 600 Male Connector Fittings include titanium dioxide production (chloride route), vinyl chloride monomer (VCM), magnesium chloride, and perchloroethylene syntheses. Softening by annealing begins at about 1600 Degree F (871 Degree C), these Inconel 600 Ferrule Fittings is reasonably complete after 10 to 15 minutes of heating at 1800 Degree F (982 Degree C).
Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings
Inconel 600 Double Ferrule Fittings is slightly more machinable compared to 304 stainless steel and should be performed by means of tools large enough to handle the loads. Applications of Alloy 600 Tube Fittings include heaters, bubble towers, stills and condensers for processing of fatty acids. Alloy 600 Male Connector Fittings is combination of Nickel Chromium and Iron provides a standard material for the chemical industry and the automotive engine, aero – engine and airframe sectors.
Inconel 600 Tube to Male Fittings Specifications |
||
| Specifications | : | ASTM B366 ASME SB366 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Inconel, 300/1000/3000PSI for Brass |
Inconel Alloy 600 Tube To Male Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Inconel 600 Tube To Male Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Equivalent Grades for 600 Inconel Ferrule Fitting Tube To Male Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Alloy 600 Tube To Male Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Inconel 600 Tube To Male Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Inconel Alloy 600 Tube to Male Fittings
Sachiya Steel International offers a wide range of Inconel Alloy 600 Tube to Male Fittings in various sizes and dimensions, which has Carburization resistance and Oxidation resistance to 2000 Degree F.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
