Titanium Grade 2 Washers Manufacturer In Bangalore

Sachiya Steel International is one of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Washers, which is available in different sizes, unalloyed or alloyed. Because of all these qualities, these Titanium Grade 2 Flat Washers is the material of choice for any application where ease of formability is required and is commonly available as titanium plate and tubing. Corrosion resistance of Titanium Grade 2 Lock Washers comes from a strongly adherent, stable, protective oxide film, which forms in the presence of oxygen. These Titanium Grade 2 Sealing Washers has intermediate and final annealing in inert gas or vacuum, where it can perform final heat treatments in vacuum.

Titanium Grade 2 Washers
Titanium Grade 2 Washers
Titanium Grade 2 Washers Manufacturer In India | Titanium Grade 2 Washers Manufacturer In Bangalore | Titanium Grade 2 Washers Exporter In India | Titanium Grade 2 Washers Exporter In Bangalore | Titanium Grade 2 Washers Supplier In India | Titanium Grade 2 Washers Supplier In Bangalore | Titanium Grade 2 Washers Stockist In India | Titanium Grade 2 Washers Stockist In Bangalore

Titanium Grade 2 Split Washers has highly stressed components such as connecting rods on expensive sports cars and some premium sports equipment and consumer electronics. Such contamination may raise the impurity level beyond that of these Titanium Grade 2 Slot Washers, thereby transforming the material into grade 3 or even grade 4. Titanium Grade 2 Machine Washers is an attractive Grade of Titanium due to its excellent corrosion resistance, good formability, and limited strength.

These Titanium Grade 2 Star Washers has fairish resistance in sulphuric acid and sodium hydroxide, where they do not resist in reducing acids, chlorides gases. Titanium Grade 2 Wire Spring Washers provides excellent welding properties and has excellent resistance to oxidation and corrosion. These Titanium Grade 2 Flat Spring Washers typically comes in the Annealed condition.

Titanium Gr2 Washer Specifications

Specifications : IS / BS / ASTM
Standard : ASTM B348
Length : up to 5 Meters
Size : M10 to M36
Type : Flat Washer, Lock Washer, Sealing Washer, Split Washer, Slot Washer, Machine Washer, Star Washer SPRINGS – Wire Spring & Flat Spring

Titanium Alloy Gr 2 Washers Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max

Ti Grade2 Washer Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Equivalent Grades for Titanium Alloy Gr 2 Washer

STANDARD WERKSTOFF NR. UNS
Titanium Grade2 3.7035 R50400

Titanium Alloy Washers Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Ti Grade 2 Washers Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Titanium Grade 2 Washers
Titanium Grade 2 Washers Manufacturer

Sachiya Steel International is one of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Washers, which is available in different sizes, unalloyed or alloyed. Because of all these qualities, these Titanium Grade 2 Flat Washers is the material of choice for any application where ease of formability is required and is commonly available as titanium plate and tubing.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply