Titanium Gr 2 Wire Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Titanium Gr 2 Wire, which has a detrimental effect on ductility and its content kept as low as possible. In the majority of these and other engineering applications, Titanium Grade 2 Wire has replaced heavier, less serviceable or less cost effective materials. Titanium Grade 2 Coil Wire is the best among commercially pure titanium grades, where it is the softest and most ductile compared to grades. Typical applications for Titanium Grade 2 Wire include chemical process, petroleum refining, biomedical as well as heat exchangers in an array of different applications.

Titanium Gr 2 Wire
       Titanium Gr 2 Wire

Titanium Grade 2 are light in weight, have extraordinary corrosion resistance and the ability to withstand extreme temperatures. Titanium Grade 2 Wire is used commonly in applications that require welding because of its strong weldability properties. Ti Gr. 2 Filler Wire is higher in strength than CP Grade 1, but lower in strength than CP Grade 3 and CP Grade 4. Ti Gr.

Titanium Gr 2 Wire | Titanium Gr 2 Wire | Titanium Gr 2 Wire | Titanium Gr 2 Wire | Titanium Gr 2 Wire 

2 Electrode is used in aviation, aerospace, military, chemical, petrochemical industry, in the medical field, jewelry, calibration of measurement instruments, piercing purposes. Ti Gr. 2 Welding Electrode is also used in Architecture, Automotive Desalination, Dimensional Stable Anodes, Medical, Marine, and Processing & Chlorate Manufacturing. As a single – phase material, the properties of Ti Gr. 2 Welding Wire are controlled by chemistry (iron and interstitial impurity elements) and grain size.

Titanium Gr.2 Wire Specifications

Specifications : ASTM B863 ASME SB863
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire, Electrode Wire, Welding Wire.

Titanium Grade 2 Wire Chemical Composition

Grade Ti C Fe H N O
Titanium Grade 2  99.2 min  0.1 max 0.3 max  0.015 max 0.3 max  0.025 max

Titanium Grade 2 Wire Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 4.5 g/cm3  1665 °C (3030 °F)  Psi – 49900 , MPa – 344  Psi – 39900 , MPa – 275  20%

Equivalent Grades for Grade 2 Titanium Wire

STANDARD WERKSTOFF NR. UNS
Titanium Grade 2 3.7035 R50400

Titanium Grade 2 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Grade 2 Titanium Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Titanium Gr 2 Wire
Titanium Gr 2 Wire Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Titanium Gr 2 Wire, which has a detrimental effect on ductility and its content kept as low as possible.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply