Sachiya Steel International is One of the Leading Manufacturer And Exporter of High Quality Titanium Gr 2 Tube to Female Pipes, which is alloyed with 6 % Aluminum and 4 % Vanadium. Titanium Grade 2 Compression Fittings has good ductility, which allows for cold formability. Hot roll, forge and hot press, initial roughing for Titanium Grade 2 Ferrule Fittings is done at 86 Degree F to 122 Degree F (30 Degree C to 50 Degree C) higher than beta transits, Finish from 1499 Degree F to 1652 Degree F (815 Degree C to 900 Degree C). This heat treatment process is carried out after Titanium Grade 2 Double Ferrule Fittings has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high – strength product.
Annealing of Titanium Grade 2 Double Ferrule Fittings in air oxidizes the surface to a depth of 0.1 mm to 0.2 mm, depending on time and temperature of the treatment. Titanium Grade 2 Female Connector Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate.
Titanium Gr 2 Tube to Female Pipes Manufacturer In India | Titanium Gr 2 Tube to Female Pipes Manufacturer In Mumbai | Titanium Gr 2 Tube to Female Pipes Exporter In India | Titanium Gr 2 Tube to Female Pipes Exporter In Mumbai | Titanium Gr 2 Tube to Female Pipes Supplier In India| Titanium Gr 2 Tube to Female Pipes Supplier In Mumbai| Titanium Gr 2 Tube to Female Pipes Stockist In India
We also boast an Accredited Testing Laboratory for Grade 2 Titanium Tube Fittings which is unique within the multi – metal and plastic stockholding sector. Most of the applications of Grade 2 Titanium Compression Fittings are in the chemical industries, where the most common uses are reactor autoclaves, piping and fittings, valves, heat exchangers and condensers.
Titanium Gr 2 Tube to Female Pipes Specifications |
||
| Specifications | : | ASTM B381 ASME SB 381 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 4000 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
Grade 2 Titanium Tube to Female Pipes Fitting Chemical Composition
| Titanium Gr 2 | C | Ti | N | Fe | H | O | V | Al |
| 0.1 max | 99.2 min | 0.03 max | 0.3 max | 0.015 max | 0.25 max | – | – |
Titanium Alloy Gr.2 Tube to Female Pipes Fitting Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 39900 , MPa – 275 | Psi – 49900 , MPa – 344 | 20 % |
Equivalent Grades for Grade 2 Titanium Tube to Female Pipes Fitting
| STANDARD | UNS | WERKSTOFF NR. |
| Titanium Grade 2 | R50400 | 3.7035 |
Titanium Titanium Alloy Gr.2 Tube to Female Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Titanium Gr 2 Tube to Female Pipes Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Titanium Gr 2 Tube to Female Pipes
Sachiya Steel International is One of the Leading Manufacturer And Exporter of High Quality Titanium Gr 2 Tube to Female Pipes, which is alloyed with 6 % Aluminum and 4 % Vanadium. Titanium Grade 2 Compression Fittings has good ductility, which allows for cold formability.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
