Titanium Gr 2 Plates Manufacture

Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Plates, Sheets and Coils, which has a number of outstanding features to offer such as dimensionally stable, fine finish, high material power, etc. Titanium Grade 2 Plates as well has some other excellent features to offer such as hard-wearing, light weight, soaring tensile potency and so on. Superior quality steel is used by our specialists to make the offered collection of Titanium Grade 2 Coils following market set rules.

Titanium Gr 2 Plates
Titanium Gr 2 Plates

The offered range of Titanium Grade 2 Slating Coils is made by keeping in deliberation the demands of our respectable clienteles. Available in the company of us is a higher quality variety of Titanium Grade 2 Perforated Coils. Meanwhile, Grade 2 Titanium Plates are also being offered in different sizes and shapes to our customers. Grade 2 Titanium Coils is also used in Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Architecture, Hydro Carbon Processing, Marine, Medical, and Power Generation.

Titanium Gr 2 Plates Manufacturer In India | Titanium Gr 2 Plates Manufacturer In Mumbai| Titanium Gr 2 Plates Exporter In India | Titanium Gr 2 Plates Exporter In Mumbai | Titanium Gr 2 Plates Supplier In India | Titanium Gr 2 Plates Supplier In Mumbai | Titanium Gr 2 Plates Stockist In India | Titanium Gr 2 Plates Stockist In Mumbai 

Grade 2 Titanium Slating Coils is widely used because it combines excellent formability and moderate strength with superior corrosion resistance. Grade 2 Titanium Perforated Coils offers high corrosion resistance in oxidizing, neutral and mildly reducing media, including chlorides. Ti Gr. 2 Sheets is commercially pure titanium, where oxidation of the surface is often required to prevent seizing on drawing. CP-Ti 1 grade shows a slightly better corrosion resistance than our Ti Gr. 2 Plates.

Titanium Gr 2 Sheet, Plate & Coil Specifications

Specifications : ASTM / ASME SB265
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Titanium Gr 2 Plate, Sheet & Coil Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max

Titanium Gr 2 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Equivalent Grades for Gr 2 Titanium Sheets & Plates

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 2 3.7035 R50400

Titanium Gr 2 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Gr 2 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Titanium Gr 2 Plates
titanium sheets plates 1

Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Plates, Sheets and Coils, which has a number of outstanding features to offer such as dimensionally stable, fine finish, high material power, etc. Titanium Grade 2 Plates as well has some other excellent features to offer such as hard-wearing, light weight, soaring tensile potency and so on

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply