Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 446 Sheets, Plates Coils, which is susceptible to SCC in environments such as methyl alcohol and red fuming. Stainless Steel 446 Plates is low interstitial version of stainless steel, for maximum toughness, and is preferred for marine and cryogenic applications. Stainless Steel 446 Coils is normally used in the annealed condition, and is the preferred choice for the medical implant field. For marine environments, silver plated bolts are not used for Stainless Steel 446 Slating Coils, as silver bonds easily with chlorine in this environment.
In the case of red fuming nitric acid for Stainless Steel 446 Perforated Coils, the problem is limited to environments containing less than water, or more than NO2. Failure in 446 Stainless Steel Sheets has occurred when oxygen and chlorides were present as impurities. 446 Stainless Steel Plates provides the best combination of strength and toughness of the commercially available titanium alloys. The strength of 446 Stainless Steel Coils permits about a 27 % weight savings when compared to SS 309.
Solution treated and aged SS 446 Sheets possesses excellent resistance to stress corrosion cracking, typically being greater. Solution treated SS 446 Plates should not be subject to long term exposure in the 500 Degree F – 800 Degree F range, where this could result in high strength but low ductility. For lower strength, overage these SS 446 Coils in the 950 Degree F – 1150 Degree F range.
Stainless Steel 446 Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM A240 / ASME SA240 |
| Thickness | : | 4mm-100mm |
| Width |
: | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
SS 446 Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| SS 446 | 0.2 max | 1.5 max | 0.75 max | 0.04 max | 0.030 max | 23 – 30 | – | 0.50 max | 0.10 – 0.25 | Balance |
Stainless Steel 446 Sheets, Plates & Coils Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.5 g/cm3 | 1510 °C (2750 °F) | Psi – 75,000 , MPa – 485 | Psi – 40,000 , MPa – 275 | 20 % |
Equivalent Grades for 446 Stainless Steel Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 446 | 1.4762 | S44600 | – | – | – | – | – |
SS 446 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 446 Sheets, Plate & Coils Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 446 Sheets
Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 446 Sheets, Plates Coils, which is susceptible to SCC in environments such as methyl alcohol and red fuming. Stainless Steel 446 Plates is low interstitial version of stainless steel, for maximum toughness, and is preferred for marine and cryogenic applications.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
