Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Tube to Union Fittings, which represent an excellent combination of corrosion resistance and fabricability. These Stainless Steel 410 Tube Fittings similar to parker and Swagelok is austenitic chromium – nickel stainless steel, non – hardenable by thermal treatments. Stainless Steel 410 Compression Fittings may be cold worked to high tensile strengths with slightly lower. These Stainless Steel 410 Union Tube Fittings is the most widely used of the austenitic (chromium / nickel) stainless steels. In the annealed condition, Stainless Steel 410 Ferrule Fittings is essentially non – magnetic and becomes slightly magnetic with the application of cold work.
Stainless Steel 410 Tube to Union Fittings Manufacturer In India | Stainless Steel 410 Tube to Union Fittings Manufacturer In Mumbai | Stainless Steel 410 Tube to Union Fittings Exporter In India | Stainless Steel 410 Tube to Union Fittings Exporter In Mumbai | Stainless Steel 410 Tube to Union Fittings Supplier In India | Stainless Steel 410 Tube to Union Fittings Supplier In Mumbai | Stainless Steel 410 Tube to Union Fittings Stockist In India | Stainless Steel 410 Tube to Union Fittings Stockist In Mumbai
These Stainless Steel 410 Double Ferrule Fittings is preferred in welding applications to exclude the formation of chromium carbides during cooling in the heat affected region of the weld. Heat these 410 Stainless Steel Union Fittings up to 1850 Degree F to 2050 Degree F and cool at sufficiently high rates through 1500 Degree F to 800 Degree F to avoid precipitation of chromium carbides.
For Stress Relief Annealing of these 410 Stainless Steel Tube Fittings, cold worked parts should be stress relieved at 750 Degree F for half-an-hour to two hours. 410 Stainless Steel Compression Fittings are weldable by most fusion or resistance welding techniques, where its principal use is for decorative purposes. If filler metal is required, these 410 Stainless Steel Ferrule Fittings is normally used.
Stainless Steel 410 Tube to Union Specifications |
||
| Specifications | : | ASTM A276 ASME SA 479 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 410 Tube To Union Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 410 | 0.15 max | 1.0 max | 1.0 max | 0.040 max | 0.030 max | 11.5 – 13.5 | – | 0.50 max | – |
Stainless Steel 410 Tube To Union Mechanical Properties
| Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
| 410 | 65 (450) | 30 (205) | 20 | 217 | 96 |
Equivalent Grades for 410 Stainless Steel Ferrule Fitting Tube To Union
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 410 | 1.4006 | S41000 | SUS 410 | 410S21 | – | – | X12Cr13 |
SS 410 Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 410 Tube To Union Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 410 Tube to Union Fittings
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Tube to Union Fittings, which represent an excellent combination of corrosion resistance and fabricability. These Stainless Steel 410 Tube Fittings similar to parker and Swagelok is austenitic chromium – nickel stainless steel, non – hardenable by thermal treatments. Stainless Steel 410 Compression Fittings may be cold worked to high tensile strengths with slightly lower. These Stainless Steel 410 Union Tube Fittings is the most widely used of the austenitic (chromium / nickel) stainless steels. In the annealed condition, Stainless Steel 410 Ferrule Fittings is essentially non – magnetic and becomes slightly magnetic with the application of cold work.
Product Brand: Sachiya Steel International
Product Currency: INR
Product Price: 80
Product In-Stock: InStock
5