Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 347H Threaded Forged Fittings, which has high corrosion resistance in chloride containing media, including seawater. Our Stainless Steel 347H Forged Threaded Elbow is a machinability – improved version and is well suited for use in, for example, organic acids. These Stainless Steel 347H Forged Threaded Tee offers excellent and consistent machining properties for increased cutting speeds, reduced tool wear and set – up times. Our Stainless Steel 347H Forged Threaded Cross is exposed for prolonged periods to temperatures exceeding 300 Degree C (570 Degree F).
Stainless Steel 347H Threaded Forged Fittings Manufacturer In India | Stainless Steel 347H Threaded Forged Fittings Manufacturer In Mumbai | Stainless Steel 347H Threaded Forged Fittings Exporter In India | Stainless Steel 347H Threaded Forged Fittings Exporter In Mumbai | Stainless Steel 347H Threaded Forged Fittings Supplier In India | Stainless Steel 347H Threaded Forged Fittings Supplier In Mumbai | Stainless Steel 347H Threaded Forged Fittings Stockist In India | Stainless Steel 347H Threaded Forged Fittings Stockist In Mumbai
The microstructure of these Stainless Steel 347H Forged Threaded Cap changes which results in a reduction in impact strength, where this effect does not necessarily affect the behavior of the material at the operating temperature. Our Stainless Steel 347H Forged Threaded Fittings has a far lower coefficient of thermal expansion than austenitic alloys and can therefore possess certain design advantages.
In terms of resistance to general corrosion, these Stainless Steel 347H Forged Threaded Coupling is comparable or superior alloys in most media. Compared to our Stainless Steel 347H Forged Threaded Union, which does not contain molybdenum, it is clearly far superior. These Stainless Steel 347H Forged Threaded Bushing is confirmed by potential measurements of the critical temperature for the initiation of pitting corrosion (CPT) performed in chloride – bearing aqueous solutions.
Stainless Steel 347H Forged Threaded Fittings Specifications |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
SS 347H Forged Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347H | 0.10 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 8xC – 1.10 | 9.00 – 13.00 | 63.72 min |
Stainless Steel 347H Threaded Fitting Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 347H Stainless Steel Forged Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347H | 1.4961 | S34709 | SUS 347H | – | – | – | X6CrNiNb18-12 |
Stainless Steel 347H Forged Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
SS 347H Forged Threaded Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 347H Threaded Forged Fittings
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 347H Threaded Forged Fittings, which has high corrosion resistance in chloride containing media, including seawater. Our Stainless Steel 347H Forged Threaded Elbow is a machinability – improved version and is well suited for use in, for example, organic acids. These Stainless Steel 347H Forged Threaded Tee offers excellent and consistent machining properties for increased cutting speeds, reduced tool wear and set – up times. Our Stainless Steel 347H Forged Threaded Cross is exposed for prolonged periods to temperatures exceeding 300 Degree C (570 Degree F).
Product In-Stock: InStock
5