Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 304 Plates, Sheets, Coils, which is increasingly used in extreme environments. The cold – formation of Stainless Steel 304 Sheets is done by the standard processes used for steel and that of stainless steel. These Stainless Steel 304 Plates is also being considered in advanced reactor concepts because of its high allowable design strength at elevated temperatures, especially between the ranges of 1200 Degree F – 1400 Degree F (649 Degree C – 760 Degree C). Stainless Steel 304 Coils is slightly more machinable but less machinable than that of free – machining stainless steel.
Because of cracking and micro structural segregation, welding of these Stainless Steel 304 Slating Coils is troublesome. Gas tungsten arc welding is the most common welding method used for Stainless Steel 304 Perforated Coils, where recently pulsed micro laser welding have turned out to be popular as well.
Stainless Steel 304 Plates Manufacturer In India | Stainless Steel 304 Plates Manufacturer In Mumbai | Stainless Steel 304 Plates Exporter In India| Stainless Steel 304 Plates Exporter In Mumbai| Stainless Steel 304 Plates Supplier In India| Stainless Steel 304 Plates Supplier In Mumbai| Stainless Steel 304 Plates Stockist In India| Stainless Steel 304 Plates Stockist In Mumbai
Little or no attack occurs for these SS 304 Sheets at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550 Degree C in these media, SS 304 Plates has been shown to be one of the most resistant of the common alloys. These SS 304 Coils are precisely manufactured using topmost grade raw – material and the latest technology in tandem with set industrial norms at our end.
Stainless Steel 304 Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM A240 / ASME SA240 |
| Thickness | : | 4mm-100mm |
| Width |
: | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
SS 304 Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
Stainless Steel 304 Sheets, Plates & Coils Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 304 Stainless Steel Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
SS 304 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 304 Sheets, Plate & Coils Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 304 Plates
Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 304 Plates, Sheets, Coils, which is increasingly used in extreme environments. The cold – formation of Stainless Steel 304 Sheets is done by the standard processes used for steel and that of stainless steel.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5