Stainless Steel 304 Channel Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304 Channel, which can be used in most diluted organic acids at moderate temperatures and in pure phosphoric acid at lower temperatures and up to 10 % diluted solutions at elevated temperatures. Stainless Steel 304 Angle does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid service. Working temperatures of 2100 Degree F – 2300 Degree F (1149 Degree C – 1260 Degree C) in Stainless Steel 304 C-Channel are recommended for forging, upsetting and other hot working processes. Stainless Steel 304 H-Beam contains high amounts of expensive ingredients, such as molybdenum and nickel.

Stainless Steel 304 Channel Manufacturer In India | Stainless Steel 304 Channel Manufacturer In Mumbai | Stainless Steel 304 Channel Exporter In India | Stainless Steel 304 Channel Exporter In Mumbai | Stainless Steel 304 Channel Supplier In India | Stainless Steel 304 Channel Supplier In Mumbai | Stainless Steel 304 Channel Stockist In India | Stainless Steel 304 Channel Stockist In Mumbai
Stainless Steel 304 Channel
  Stainless Steel 304 Channel

Stainless Steel 304 I-Beam is non – magnetic in all conditions and has excellent formability and weldability. The austenitic structure of Stainless Steel 304 T-Beam also gives excellent toughness, even down to cryogenic temperatures. Stainless Steel 304 Chain is a heat resistant, titanium stabilized, austenitic alloy that’s commonly used for service in the 1000 Degree F – 1600 Degree F temperature range.

SS 304 Angle is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of 800 Degree F – 1500 Degree F. SS 304 C-Channel has chemical and mechanical properties complying specifications. Such dual certified SS 304 H-Beam does not meet specification and may be unacceptable for high temperature applications. SS 304 I-Beam must be water quenched or fully annealed after working to re – attain maximum corrosion resistance.

SS 304 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 304 Angle
: 5mm to 9mm
SS 304 Channel
: 40mm*20mm~300mm*300mm
SS 304 Beam : 3″ thru 12.31″
SS 304 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

304 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304 0.08 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 8 – 11

Stainless Steel 304 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 304 Stainless Steel Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18‐09 X5CrNi18-10

SS 304 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

304 Steel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 304 Channel
Stainless Steel 304 Channel

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304 Channel, which can be used in most diluted organic acids at moderate temperatures and in pure phosphoric acid at lower temperatures and up to 10 % diluted solutions at elevated temperatures. Stainless Steel 304 Angle does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid service. Working temperatures of 2100 Degree F – 2300 Degree F (1149 Degree C – 1260 Degree C) in Stainless Steel 304 C-Channel are recommended for forging, upsetting and other hot working processes. Stainless Steel 304 H-Beam contains high amounts of expensive ingredients, such as molybdenum and nickel.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply