SMO 254 Plates Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality SMO 254 Plates, Sheets, Coils, where we offer them in wide – ranging standard thickness and sizes, along with making sure for long working life. SMO 254 Plates may perhaps offer a reasonable solution to Titanium and Nickel alloys in a number of atmospheres. SMO 254 Coils is considerably sturdier than the usual austenitic grades by means of potency approximately double that of 300 series of stainless steel. In addition, these SMO 254 Slating Coils is soaring alloyed austenitic steel by means of excellent corrosion resistance. SMO 254 Perforated Coils (UNS S31254) provides chloride resistance higher to that of Alloy 20, Alloy 904L, Alloy G and Alloy 825.

SMO 254 Plates
SMO 254 Plates

Meanwhile, these Alloy 254 Sheets are also being offered in different sizes and shapes to our customers. Alloy 254 Plates demonstrates outstanding resistance to pitting, crevice corrosion stress cracking, and corrosion fatigue uniform corrosion. Alloy 254 Coils is substantially stronger than the common austenitic grades, with strength nearly twice that of 300 series stainless steel.

SMO 254 Plates Manufacturer In India| SMO 254 Plates Manufacturer In Mumbai | SMO 254 Plates Exporter In Mumbai | SMO 254 Plates Supplier In India | SMO 254 Plates Supplier In Mumbai| SMO 254 Plates Stockist In India| SMO 254 Plates Stockist In Mumbai 

Alloy 254 Slating Coils is also characterized by high ductility and impact strength. With high levels of chromium, molybdenum, and nitrogen, Alloy 254 Perforated Coils is frequently used in high chloride environments, such as brackish water, seawater, pulp mill bleach plants, and other chloride process streams. In some applications, 254 SMO Plates has even been found to be a more cost effective substitute for high nickel and titanium alloys.

SMO 254 Sheet, Plate & Coil Specifications
Specifications : ASTM A240 / ASME SA240
Thickness : 4mm-100mm
Width
: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

SMO 254 Plate, Sheet & Coil Chemical Composition

Grade Ni Cr Mo Cu N C Mn Si P S
SMO 254 17.5-18.5 19.5-20.5  6-6.5 0.5-1.0 0.18-0.22 0.02 1.0 0.08 0.03 0.01

SMO 254 Sheets, Plates & Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 8.0 g/cm3 1320-1390 ℃ 650 300  35 %

Equivalent Grades for 254 SMO Sheets & Plates

STANDARD WERKSTOFF NR. UNS SIS AFNOR EN
SMO 254 1.4547 S31254 2378 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7

SMO 254 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SMO 254 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

SMO 254 Plates
SMO 254 Plates Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality SMO 254 Plates, Sheets, Coils, where we offer them in wide – ranging standard thickness and sizes, along with making sure for long working life.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply