Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality SMO 254 Chain And Other SMO 254 Products, which is available in different sizes, designs and shapes in customized options for our clients. SMO 254 Angle has been shown that nickel has very little statistically detectable effect on pitting corrosion resistance over the full range of austenitic stainless steels. When SMO 254 C-Channel is not satisfactory for use in a particular application due to susceptibility to SCC, then selection of the other alloys for that application would be an exceedingly risky proposition.
SMO 254 Chain Manufacturer In India | SMO 254 Chain Manufacturer In Mumbai | SMO 254 Chain Exporter In India | SMO 254 Chain Exporter In Mumbai | SMO 254 Chain Supplier In India | SMO 254 Chain Supplier In Mumbai | SMO 254 Chain Stockist In India | SMO 254 Chain Stockist In Mumbai
Support for the similar performance comes from the very similar Pitting Resistance Equivalent number for SMO 254 Chain. The Pitting Resistance Equivalent number employs statistical regression in SMO 254 H-Beam to relate pitting resistance to the chemical composition of a stainless steel. The Pitting Resistance Equivalent number calculations from various investigators have demonstrated that the pitting resistance of SMO 254 I-Beam depends primarily on the level of Cr, Mo, and N content.
The sensitivity of the Pitting Resistance Equivalent number data is such that within grade variations of Cr, Mo, and N near the nominal values for SMO 254 T-Beam. The apparent Pitting Resistance Equivalent number variation of Alloy 254 Angle is of minor import compared to effects from surface finish, normal variations in practical annealing conditions, and variations in the corrosiveness of the environment. Low nickel content of our Alloy 254 Chain makes them price stable.
SMO 254 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SMO 254 Angle |
: | 5mm to 9mm |
| SMO 254 Channel |
: | 40mm*20mm~300mm*300mm |
| SMO 254 Beam | : | 3″ thru 12.31″ |
| SMO 254 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
254 SMO Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | Cu | S | P | Mo | Ni | Cr |
| SMO 254 | 0.02 | 1.0 | 0.08 | 0.5-1.0 | 0.01 | 0.03 | 6.0-6.5 | 17.5-18.5 | 19.5-20.5 |
SMO 254 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8 g/cm3 | 1320-1390 ℃ | 650 | 300 | 35 % |
Equivalent Grades for 254 SMO Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SMO 254 | 1.4547 | S31254 | 2378 | – | – | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
SMO 254 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
254 SMO Angle, Channel, Beam, Chain Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
SMO 254 Chain
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality SMO 254 Chain And Other SMO 254 Products, which is available in different sizes, designs and shapes in customized options for our clients. SMO 254 Angle has been shown that nickel has very little statistically detectable effect on pitting corrosion resistance over the full range of austenitic stainless steels. When SMO 254 C-Channel is not satisfactory for use in a particular application due to susceptibility to SCC, then selection of the other alloys for that application would be an exceedingly risky proposition.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5