Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Round Bars, which usually takes a long time for nickel to be removed from air. Nickel 201 Square Bars is released into the air by power plants and trash incinerators, where it will than settle to the ground or fall down after reactions with raindrops. Nickel 201 Flat Bars can also end up in surface water when it is a part of wastewater streams. The larger part of compounds from Nickel 201 Threaded Bars that are released to the environment will adsorb to sediment or soil particles and become immobile as a result.
Nickel Alloy 201 Round Bars Manufacturer In India | Nickel Alloy 201 Round Bars Manufacturer In Mumbai | Nickel Alloy 201 Round Bars Exporter In India | Nickel Alloy 201 Round Bars Exporter In Mumbai | Nickel Alloy 201 Round Bars Supplier In India | Nickel Alloy 201 Round Bars Supplier In Mumbai | Nickel Alloy 201 Round Bars Stockist In India | Nickel Alloy 201 Round Bars Stockist In Mumbai
In acidic ground however, Nickel 201 Hollow Bars is bound to become more mobile and it will often rinse out to the groundwater. We do know that high nickel concentrations on sandy soils from Nickel 201 Hexagonal Bars can clearly damage plants and high nickel concentrations in surface waters can diminish the growth rates of algae. Micro – organisms can also suffer from growth decline due to the presence of Nickel 201 Triangular Bars, but they usually develop resistance to nickel after a while.
But Nickel 201 Bars is not only favorable as an essential element, where it can also be dangerous when the maximum tolerable amounts are exceeded. Nickel 201 Rods is often used to provide a protective coating for other metals, and finely divided nickel is a catalyst for hydrogenating vegetable oils.
Nickel 201 Round Bar Specifications |
||
Specifications | : | ASTM B160 / ASTM SB160 |
Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Size |
: | 5 mm To 500 mm |
Diameter | : | 0.1 mm to 100 mm |
Length | : | 100 mm To 3000 mm Long & Above |
Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
201 Nickel Round Bar Chemical Composition
Grade | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.25 max | 0.01 min | 0.40 max | – | 99 min | – |
Nickel Alloy 201 Rods Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67,000 , MPa – 462 | Psi – 21,500 , MPa – 148 | 45 % |
Equivalent Grades for 201 Nickel Round Bar
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | LC-Ni 99 |
Nickel 201 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
201 Nickel Rods Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Nickel Alloy 201 Round Bars
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Round Bars, which usually takes a long time for nickel to be removed from air. Nickel 201 Square Bars is released into the air by power plants and trash incinerators, where it will than settle to the ground or fall down after reactions with raindrops.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5