Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Tube to Union Fittings similar to parker and Swagelok, where it is the duty of our team members to check these products for any kind of finishing flaw thereby attaining utmost contentment of the customers. The machinability of Monel 400 Tube Fittings (UNS N04400) is difficult as it work-hardens during machining. Monel 400 Compression Fittings shows high strength and excellent corrosion resistance in a range of acidic and alkaline environments and it’s especially suitable for reducing conditions. Because of its good corrosion resistance, Monel 400 Ferrule Fittings is also used in chemical plant equipment.
Monel Alloy 400 Tube to Union Fittings Manufacturer In India | Monel Alloy 400 Tube to Union Fittings Manufacturer In Mumbai | Monel Alloy 400 Tube to Union Fittings Exporter In India | Monel Alloy 400 Tube to Union Fittings Exporter In Mumbai | Monel Alloy 400 Tube to Union Fittings Supplier In India | Monel Alloy 400 Tube to Union Fittings Supplier In Mumbai | Monel Alloy 400 Tube to Union Fittings Stockist In India | Monel Alloy 400 Tube to Union Fittings Stockist In Mumbai
Monel 400 Double Ferrule Fittings is also used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. Meanwhile, these Monel 400 Union Fittings are also being offered in different sizes and shapes to our customers. Temperatures down to -320 Degree F, Alloy 400 Tube Fittings show excellent ductility and tough fracture characteristics.
Alloy 400 Compression Fittings is particularly resistant to hydrochloric and hydrofluoric acids when they are de – aerated. As would be expected from its high copper content, Alloy 400 Union Fittings is rapidly attacked by nitric acid and ammonia systems. Alloy 400 Ferrule Fittings are most often found in chemical plant equipment due to their strong resistance to chemical corrosion. While it is corrosion resistant under many circumstances, Alloy 400 Double Ferrule Fittings can corrode when exposed to certain substances.
Monel 400 Tube to Union Specifications |
||
| Standards | : | ASTM B366 / ASME SB366 |
| Size Range | : | 1/16″OD to 2″OD, 2mm OD to 50mm OD |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| End |
: | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Monel Alloy 400 Tube To Union Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Monel 400 Tube To Union Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Equivalent Grades for 400 Monel Ferrule Fitting Tube To Union
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Monel Alloy 400 Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Monel 400 Tube To Union Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Monel Alloy 400 Tube to Union Fittings
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Tube to Union Fittings similar to parker and Swagelok, where it is the duty of our team members to check these products for any kind of finishing flaw thereby attaining utmost contentment of the customers. The machinability of Monel 400 Tube Fittings (UNS N04400) is difficult as it work-hardens during machining. Monel 400 Compression Fittings shows high strength and excellent corrosion resistance in a range of acidic and alkaline environments and it’s especially suitable for reducing conditions. Because of its good corrosion resistance, Monel 400 Ferrule Fittings is also used in chemical plant equipment.
Product Brand: Sachiya Steel International
Product Currency: INR
Product Price: 80
Product In-Stock: InStock
5