Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Buttweld Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain. In fact, Monel 400 Tee Pipe Fittings is a nickel – copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 Pipe Elbow works in a wide range of temperatures, and is available in multiple forms for a variety of products.
Monel Alloy 400 Buttweld Fittings Manufacturer In India | Monel Alloy 400 Buttweld Fittings Manufacturer In Mumbai | Monel Alloy 400 Buttweld Fittings Exporter In India | Monel Alloy 400 Buttweld Fittings Exporter In Mumbai | Monel Alloy 400 Buttweld Fittings Supplier In India | Monel Alloy 400 Buttweld Fittings Supplier In Mumbai | Monel Alloy 400 Buttweld Fittings Stockist In India | Monel Alloy 400 Buttweld Fittings Stockist In Mumbai
Meanwhile, these Monel 400 Reducer are also being offered in different sizes and shapes to our customers. Our Monel 400 Cross Pipe Fittings (UNS N04400) is a nickel – copper alloy with good strength and excellent corrosion resistance in a range of media especially sea water, hydrofluoric acid, sulfuric acid, and alkalis. Monel 400 Bend Pipe Fittings is a solid – solution alloy that can be hardened only by cold working, where nickel and copper form a solid solution in all compositions.
These Monel 400 Stub End can be fabricated readily by hot – and cold – working, machining, and welding. Thus, Monel 400 End Cap Pipe Fittings can only be hardened by further rolling, while showing excellent corrosion resistance, which is higher than that of pure nickel in reduced environments and better than that of copper in oxidizing environments.
Monel 400 Pipe Fittings Specifications |
||
| Specifications | : | ASTM B366 / ASME SB366 |
| Size | : | Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″ |
| Standards |
: | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | : | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | : | Seamless / Welded / Fabricated |
Monel 400 Pipe Fittings Chemical Composition
| Monel 400 | Ni | C | Al | Mn | Si | Fe | Cu | S | Co | Cr |
| 63.0 min | 0.3 max | 0.50 max | 2.0 max | 0.5 max | 1.0 – 2.5 | 28.0 – 34.0 | 0.02 max | – | – |
Monel 400 Buttweld Fittings Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 35,000 , MPa – 240 | Psi – 80,000 , MPa – 550 | 40 % |
Equivalent Grades for 400 Monel Pipe Fitting
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Monel 400 | N04400 | 2.4360 | NU-30M | NiCu30Fe | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 |
Monel Alloy 400 Buttweld Pipe Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Monel 400 Buttweld Fitting Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Monel Alloy 400 Buttweld Fittings
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Buttweld Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain. In fact, Monel 400 Tee Pipe Fittings is a nickel – copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 Pipe Elbow works in a wide range of temperatures, and is available in multiple forms for a variety of products.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5