Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 601 Flanges, which has some great features such as fine finishing, corrosion resistant, easy to fit and more. Inconel 601 Slip On Raised Flanges (UNS N06601) are used in Radiant tubes, Strand annealing tubes, Steam super-heater tube supports, and more. Some of the great properties that draw users to Inconel 601 Threaded Flanges include: good aqueous corrosion resistance, outstanding mechanical strength, and more. Inconel 601 Weld Neck Raised Flanges is formed using all conventional techniques.
For maximum oxidation resistance, Inconel 601 Blind Flanges should be welded with matching composition 601 alloy GTAW wire. Inconel 601 Socket Weld Flanges develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. Inconel 601 Ring Joint Type Flanges is often used in thermal processing equipment – fixtures, baskets, trays, radiant tubes, flame shields, muffles, retorts, woven wire conveyers, electrical resistance heating wires and burner nozzles. Further important applications of Inconel 601 Spectacle Blind Flanges are to be found in the pollution control, aerospace – where it is used in jet-engine igniters – and power generation industries.
Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges
Resistance to carburization of Inconel 601 Long Weld Neck Flanges is good, also resistant to carbon nitriding conditions. Inconel 601 Nippon Flanges is highly resistant to carburization, along with has metallurgical stability and good creep rupture strength. Meanwhile, these Inconel 601 Lap Joint Flanges are also being offered in different sizes and shapes to our customers.
Inconel 601 Pipe Flanges Specifications |
||
| Specifications | : | ASTM B564 / ASME SB564 |
| Size | : | 1/2″NB TO 60″NB |
| Standards |
: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 601#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
Inconel Alloy 601 Pipe Flanges Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 601 | 0.10 max | 1.00 max | 0.50 max | 0.015max | 1.00 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
Inconel 601 Plate Flanges Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Equivalent Grades for 601 Inconel Industrial Pipe Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
Alloy 601 Flanges Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Inconel 601 Pipe Flanges Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Inconel 601 Flanges
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 601 Flanges, which has some great features such as fine finishing, corrosion resistant, easy to fit and more.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
