Sachiya Steel International offers an extensive collection of Inconel 600 Sheet, Plates and Coils in different dimensions and sizes, where we as well offer the same at best possible rates. These Inconel 600 Sheets has outstanding corrosion by soaring-purity water, together with caustic corrosion.
Our Inconel 600 Plates has suitable resistance to dry HCl and Cl2 gases at reasonably high temperatures. The high content of nickel of this Inconel 600 Coils offers excellent resistance to chloride stress corrosion cracking, where conventional machining practices used for iron constructed alloys may perhaps be used.
Inconel 600 Sheet | Inconel 600 Sheet | Inconel 600 Sheet | Inconel 600 Sheet | Inconel 600 Sheet
Our Inconel 600 Slating Coils has Exceptional Corrosion Resistance at Elevated Temperatures, which shows soaring levels of resistance to stress – corrosion cracking. These Inconel 600 Perforated Coils (UNS N06600) presents the needed grouping of good weldability and high strength under an extensive collection of temperatures.
Our Alloy 600 Plates is often used in for furnace components, chemical and food processing, nuclear engineering, for sparking electrodes and so on. These Alloy 600 Coils provides resistance to a number of organic and inorganic compounds, alkaline solutions and chloride – ion stress – corrosion cracking as well. Our Alloy 600 Slating Coils is virtually immune to chloride ion stress corrosion cracking and is also non – magnetic and resistant to a wide range of corrosive materials. Meanwhile, these Alloy 600 Perforated Coils are as well being offered in different sizes and shapes to our customers.
Inconel 600 Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM / ASME SB 168 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Inconel 600 Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Alloy 600 Sheets, Plates & Coils Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Equivalent Grades for 600 Inconel Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Inconel 600 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Alloy 600 Sheets, Plate & Coils Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Inconel 600 Sheet
Sachiya Steel International offers an extensive collection of Inconel 600 Sheet, Plates and Coils in different dimensions and sizes, where we as well offer the same at best possible rates.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
