Incoloy 800 Washers Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Washers, which is often used in industrial furnace components and equipment, along with petrochemical and chemical processing. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with Incoloy 800 Flat Washers. Offering superior high – temperature strength, Incoloy 800H Lock Washers are widely used in applications requiring heat resistance, as they do not become brittle due to sigma phase precipitation during use.

Incoloy 800 Washers Manufacturer In India | Incoloy 800 Washers Manufacturer In Mumbai | Incoloy 800 Washers Exporter In India | Incoloy 800 Washers Exporter In Mumbai | Incoloy 800 Washers Supplier In India | Incoloy 800 Washers Supplier In Mumbai | Incoloy 800 Washers Stockist In India | Incoloy 800 Washers Stockist In Mumbai
Incoloy 800 Washers
     Incoloy 800 Washers

Incoloy 800HT Sealing Washers will not become embrittled even after long periods of usage in the 1200 Degree F – 1600 Degree F range where many stainless steels become brittle. Alloy 800 Split Washers had been known for some time that this higher carbon alloy had higher creep and rupture properties than low – carbon material. For high temperature applications requiring optimum rupture and creep properties, Alloy 800H Machine Washers are used.

Alloy 800HT Star Washers has good creep – rupture properties at temperatures above 1100 Degree F (600 Degree C). Another important feature of Incoloy 800 Wire Spring Washers is excellent resistance to chloride stress – corrosion cracking. These Incoloy 800H Flat Spring Washers are known for their excellent strength at elevated temperatures and good corrosion resistance in a variety of corrosive environments. Incoloy 800HT Spring Washers is also used in Equipment for Heat – Treating, Hydrocarbon cracking, Pressure vessels and heat exchangers.

Incoloy 800/800H Washer Specifications

Specifications : ASTM B408
Standard : DIN, ASTM, BS and all International Standards
Length : M02 to M33
Size : 3 mm to 200 mm
Type : Flat Washer, Lock Washer, Sealing Washer, Split Washer, Slot Washer, Machine Washer, Star Washer SPRINGS – Wire Spring & Flat Spring

Incoloy 800/800H/800HT Washers Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Alloy 800/800H/800HT Washer Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for Incoloy Alloy 800/800H/800HT Washer

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Alloy 800/800H/800HT Washers Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

800/800H/800HT Incoloy Washers Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Incoloy 800 Washers
Incoloy 800 Washers

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Washers, which is often used in industrial furnace components and equipment, along with petrochemical and chemical processing. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with Incoloy 800 Flat Washers

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply