Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Bolts And Nuts, which is extremely resistant to corrosion and even in acidic environment. Because of its high nickel and chromium content, Incoloy 800 Hex Head Bolts resist oxidation and carburization at high temperatures. The chemical balance allows the Incoloy 800H Square Nuts to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. For the first time, aluminum and titanium were listed as purposeful additions, and annealed Incoloy 800HT U-Bolts was differentiated from solution – annealed material.
Incoloy 800 Bolts Manufacturer In India | Incoloy 800 Bolts Manufacturer In Mumbai | Incoloy 800 Bolts Exporter In India | Incoloy 800 Bolts Exporter In Mumbai | Incoloy 800 Bolts Supplier In India | Incoloy 800 Bolts Supplier In Mumbai | Incoloy 800 Bolts Stockist In India | Incoloy 800 Bolts Stockist In Mumbai
Incoloy 800 Lock Nuts will not become embrittled even after long periods of usage in the 1200 Degree F – 1600 Degree F range where many stainless steels become brittle. The restricted chemical compositions, combined with the high temperature anneal, assure these materials have greater creep and rupture strength when compared to Incoloy 800H Eye Bolts.
Many companies in a wide range of industries utilize Incoloy 800HT Wing Nuts for a number of applications, especially those that deal with temperatures about 1100 Degree F (600 Degree C). Incoloy 800 T-Bolts is especially useful for high – temperature equipment in the petrochemical industry since the alloy doesn’t form the embrittling sigma phase after long time exposure at 1200 Degree F. Incoloy 800H Panel Bolts have nickel – chromium – iron as the base metals, with additives such as molybdenum, copper, silicon and nitrogen.
Alloy 800/800H/800HT Bolt/Nut Specifications |
||
| Specifications | : | ASTM B 408 ASME SB 408 |
| Standard | : | DIN, ASTM, BS and all International Standards |
| Length | : | 3 mm to 200 mm |
| Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
800/ 800H/ 800HT Incoloy Alloy Bolt/Nut Chemical Composition
| Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
| 800 | min. | – | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
| 800H | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
| 800HT | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 | |
Incoloy Alloy 800/ 800H/ 800HT Bolt/Nut Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 800-H-HT | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 | – | – |
Equivalent Grades for 800 / 800H / 800HT Incoloy Bolt/Nut
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Alloy 800/800H/800HT Bolt/Nut Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
800/800H/800HT Incoloy Bolt/Nut Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Incoloy 800 Bolts
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Bolts And Nuts, which is extremely resistant to corrosion and even in acidic environment. Because of its high nickel and chromium content, Incoloy 800 Hex Head Bolts resist oxidation and carburization at high temperatures
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5