Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy X Angle And Other Hastelloy Products, where its behavior occurs as a consequence of the precipitation of deleterious phases. When exposed for prolonged periods at intermediate temperatures, Hastelloy X Angle exhibits a loss of room temperature ductility in much the same fashion as some other solid – solution –strengthened super alloys. Wear results shown in Hastelloy X Chain is generated for standard matching material room – temperature pin on disc tests, where wear depths are given as a function of applied load.

The results indicate that Hastelloy X C-Channel is superior in galling resistance to many materials and is surpassed, which were specifically designed to have excellent wear resistance. Hastelloy X I-Beam are work harden rapidly during machining and require more power to cut than do the plain carbon steels. Hastelloy X T-Beam is ‘gummy,’ with chips that tend to be stringy and tough, where machine tools should be rigid and used to no more than 75 % of their rated capacity.

Both work piece and tool in Hastelloy X H-Beam should be held rigidly, and so tool overhang should be minimized. Rigidity of Alloy X Chain is particularly important when machining titanium, as titanium has a much lower modulus of elasticity than either steel or nickel alloys. Slender work pieces of titanium in Alloy X Angle tend to deflect under tool pressures causing chatter, tool rubbing and tolerance problems.


Hastelloy X Angle, Channel, Beam, Chain Specifications

Specifications : ASTM B572 / ASME B572
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Hastelloy X Angle
: 5mm to 9mm
Hastelloy X Channel
: 40mm*20mm~300mm*300mm
Hastelloy X Beam : 3″ thru 12.31″
Hastelloy X Chain
: 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain


X Hastelloy Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si Co P Fe Mo Ni Cr S
Hastelloy X 0.05 – 0.15 1 max 1 max 0.50 – 2.50 0.04 max 17.0-20.0 8.0-10.0 bal 20.50-23.00 0.03 max

Hastelloy X Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.22 g/cm3 1355 °C  MPa – 665 MPa –240 35%

Equivalent Grades for X Hastelloy Angle, Channel, Beam, Chain

Hastelloy X 2.4665 N06002


Hastelloy X Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry


X Alloy Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)



Hastelloy X Angle
ss 347h angle 1

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy X Angle And Other Hastelloy Products, where its behavior occurs as a consequence of the precipitation of deleterious phases

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating: